Does anyone know how to get into the tech or service menu to clear a SC542 error on a Aficio SPC231N

Does anyone know how to get into the tech or service menu to clear a SC542 error on a Aficio SPC231N? the power went out and we had a blown traansformer for which caused this eror I want to reset this to see if hte problem goes away
janusnetworksAsked:
Who is Participating?
 
Nenad RajsicConnect With a Mentor Commented:
A quick Google search returns this: The default service access code is "Admin074" and you need to use SOM. I don't know much about it but this might help you

http://www.copytechnet.com/forums/ricoh-savin-gestetner/52629-ricoh-aficio-spc231n-service-mode.html
0
 
janusnetworksConnect With a Mentor Author Commented:
THANKS This sent me in the right direction. So yes I went into the SOM, Connected via USB, went to Printer Configeration (you have to turn it off then On to get the config) typed Admin074 into the password went to SP Mode 2, Turned ON the Fuser SC Detect, then APply, Ok. Turn oFF printer, Turn ON Printer, then I hit the FUser SC Reset,  Click OkTurned off Printer and then turned on the Printer.
0
 
janusnetworksAuthor Commented:
My solution has the full details
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.