?
Solved

Can I use MPLS and a VPN connection on a Linksys RV082

Posted on 2011-09-05
6
Medium Priority
?
883 Views
Last Modified: 2012-05-12
I have 2 Linksys RV082's connected with an MPLS connection between 2 sites.  I need to add a VPN connection from a third site.  Does anyone know if an RV082 is capable of doing that, and if so, how to make the connection?
Thanks,
JoMar
0
Comment
Question by:JoMar
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
  • 3
6 Comments
 
LVL 97

Expert Comment

by:Experienced Member
ID: 36485825
The RV092 is certainly capable of creating another tunnel. Is there a tunnel between the existing RV082 boxes? If so, add a second tunnel the same way. ... Thinkpads_User
0
 

Author Comment

by:JoMar
ID: 36485849
the current set up is using the advanced routing tab under setup to connect the 2 RV082's.  Can I add a vpn tunnel in addition to those?
0
 
LVL 97

Accepted Solution

by:
Experienced Member earned 2000 total points
ID: 36485865
I have not used MPLS, so I do not know for sure. Go into the VPN setup and note that all it really needs from the point of view of external connection is a fixed external IP address. If you can provide that, then you should be able to make a tunnel.

I have multiple VPN's set up to clients on my own RV042 router but none are MPLS.

... Thinkpads_User
0
Four New Appliances. Same Industry-leading Speeds.

But don't take it from us.  The Firebox M370 is Miercom tested and Miercom approved, outperforming its competitors for stateless and stateful traffic throughput scenarios.  Learn more about the M370, M470, M570 and M670 and find the right solution for your organization today!

 

Author Comment

by:JoMar
ID: 36485923
ok - i will try it tomorrow and let you know.
0
 

Author Closing Comment

by:JoMar
ID: 36489382
I was able to set up a VPN tunnel along with having static routes for the MPLS.  Thanks for the info.
0
 
LVL 97

Expert Comment

by:Experienced Member
ID: 36489494
You are most welcome and I was pleased to assist. .... Thinkpads_User
0

Featured Post

WatchGuard's M Series Appliances - Miecom Approved

WatchGuard's newest M series appliances were put to the test by Miercom.  We had great results and outperformed all of our competitors in both stateless and stateful traffic throghput scenarios! Ready to see how your UTM appliance stacked up? Download the Miercom Report!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
We sought a budget ($5,000) firewall solution that would provide all the performance we needed with no single point of failure.  Hosting a SAAS web application in our datacenter, it was critical that we find a way to keep connectivity up and inbound…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…
In this video, Percona Solutions Engineer Barrett Chambers discusses some of the basic syntax differences between MySQL and MongoDB. To learn more check out our webinar on MongoDB administration for MySQL DBA: https://www.percona.com/resources/we…
Suggested Courses
Course of the Month12 days, 23 hours left to enroll

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question