Routing PC through RS6000 to secured site

pyyke
pyyke used Ask the Experts™
on
Greetings,

We have a solutions provider that we connect to using a RS6k. We have static routes in the RS6k to access the IP's of secure server over a T1 line.  They have added a web based application that must be accessed over the T1 line.  I've added static routes to the RS6K to the new addresses, but is it possible to route a PC on the network, over the RS6K to the new site?
ex:

PC IP Address: 192.168.41.60
PC Gateway: 192.168.41.7
RS6K IP Address: 192.168.41.220
Secondary Card in RS6K - 10.10.10.10 (T1 connection)
IP Address for new website app: 10.10.10.40

I've added the static route to 10.10.10.40 to the RS6000, and can ping the site, so connectiivity there is ok, But is it possible to route a PC over that connection to the 10.10.10.40 site?

Thanks in advance

Pyyke
Comment
Watch Question

Do more with

Expert Office
EXPERT OFFICE® is a registered trademark of EXPERTS EXCHANGE®
'ip forwarding' needs to be enabled to allow the traffic, go from 192 segment to 10 segment.

# no -p -a "ipforwarding=1"  




Author

Commented:
The routing was turned on and enabled, but the client routing had errors, so it wasnt the RS6k, but rather the PC routing table that was the issue

Do more with

Expert Office
Submit tech questions to Ask the Experts™ at any time to receive solutions, advice, and new ideas from leading industry professionals.

Start 7-Day Free Trial