[Last Call] Learn about multicloud storage options and how to improve your company's cloud strategy. Register Now

x
?
Solved

Setup question for a Cisco Unified communications 320w

Posted on 2011-09-07
2
Medium Priority
?
601 Views
Last Modified: 2012-06-21
Looking to setup a small branch office with a Cisco Unified communications 320w. We're looking at a PRI, but I'm wondering if this device handles that connection out of the box. Or if I need to get an add-on of some sort. If the UC320W handles it out of the box which port plugs into the PRI?

Thanks
0
Comment
Question by:michaeltegler
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 20

Accepted Solution

by:
agonza07 earned 2000 total points
ID: 36511393
320W does not support a PRI. Looks like it only supports 12 analog CO lines.

You'll probably need to look at the Cisco UC500 series, maybe the 540 will do. The PRI card is optional so make sure to build it right.

HTH
0
 

Author Closing Comment

by:michaeltegler
ID: 36511772
Thanks
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
During and after that shift to cloud, one area that still poses a struggle for many organizations is what to do with their department file shares.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

650 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question