Solved

using cisco AIR 1041 accespoint with a cisco 861 router

Posted on 2011-09-07
3
1,040 Views
Last Modified: 2013-12-27
Hello experts,

I recently got my cisco 861 router working as i wanted.
Now i'm trying to hook-up a Cisco accespoint 1041 to it. (AIR-LAP1041N-E-K9)

Now i'm not sure if these 2 can work together.
the router is connected directly to the ISP modem, and works fine.
After some reading the pdf's and other sheets about the 1040 AP series i can't get my head around how to get it configured.
the LED keeps Cycling through green, red, and amber meaning Discovery/join process in progress

Is it even possible to use these 2 together ?
If so, can i connect it with ccp so i can get it configured ?
0
Comment
Question by:Th0R
  • 3
3 Comments
 

Accepted Solution

by:
Th0R earned 0 total points
ID: 36514368
Okay i'm done with it.

They do work together, and ccp is not compatible with the accespoint.
I needed to use the web interface.

But before i could use the web interface i had to change it from lightweight mode to autonomous mode
following these instructions:
https://supportforums.cisco.com/thread/2006044

it now works fine ! :)
0
 

Author Comment

by:Th0R
ID: 36514371
I had to change the mode because i have no wireless controller setup in the network.
0
 

Author Closing Comment

by:Th0R
ID: 36514373
solved it myself
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cisco Router DMZ 5 79
AP's for Motorola RFS6000 Controller 1 41
Move configuration from Cisco 3560 to 3750X 6 53
Unauthorized Network Devices Appearing on Home Network 20 113
This article is a step by step guide on how to create a basic PTP link using Ubiquiti airOS devices. This guide can be used on the following Ubiquiti AirMAX devices. Nanostation, Bullets, AirBridge, Nanobeam, NanoBridge to name a few. Please review …
This subject  of securing wireless devices conjures up visions of your PC or mobile phone connecting to the Internet through some hotspot at Starbucks. But it is so much more than that. Let’s look at the facts: devices#sthash.eoFY7dic.
Viewers will learn how to connect to a wireless network using the network security key. They will also learn how to access the IP address and DNS server for connections that must be done manually. After setting up a router, find the network security…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

821 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question