Solved

exporting smtp addresses for existing user mailbox from exchange server 2003 and importing into exchange server 2010

Posted on 2011-09-07
1
350 Views
Last Modified: 2012-05-12
exporting smtp addresses for existing user mailbox from exchange server 2003 and importing into exchange server 2010.  I am doing the cross foresest exchange migration from 2003 to 2010.  before moving mailboxes from exchange 2003 tp 2010 I would like to add smtp contacts which are in 2003 forest into exchange server 2010 to check the free/busy during the migration.  Greatly appreciate your help
0
Comment
Question by:ranganath_krovi
1 Comment
 
LVL 10

Accepted Solution

by:
SuperTaco earned 500 total points
ID: 36500422
How many users do you have.  it may be more convenient to do a federated trust temoporarily.

http://allcomputers.us/windows_server/exchange-server-2010---configuring-federated-sharing-%28part-1%29---implementing-federated-sharing.aspx

here's a VB script that can pull the email addresses.
==========================================================================
'Set up constant for deleting values from multivalued attribute memberOf

Const ADS_PROPERTY_NOT_FOUND  = &h8000500D
Const ADS_UF_ACCOUNTDISABLE = 2                       'For UserAccountControl
Const strX400Search = "X400"
'______________________________________________________

'Set RootDSE
Set objRootDSE = GetObject("LDAP://rootDSE")
strDomain = objRootDSE.Get("defaultNamingContext")
strADPath = "LDAP://" & strDomain
'wscript.Echo strADPath
Set objDomain = GetObject(strADPath)
'wscript.echo "objDomain: " & objDomain.distinguishedName

'Setup ADODB connection
Set objConnection = CreateObject("ADODB.Connection")
objConnection.Open "Provider=ADsDSOObject;"
Set objCommand = CreateObject("ADODB.Command")
objCommand.ActiveConnection = objConnection

'Execute search command to look for Contacts & Groups
    objCommand.CommandText = _
      "<" & strADPath & ">" & ";(&(|(objectClass=contact)(objectClass=group))(mail=*))" & ";distinguishedName,displayName,mail,proxyAddresses;subtree"

    'Execute search to get Recordset
    Set objRecordSet = objCommand.Execute
   
       
        'Start procedure
       
    strResult = strResult & VbCrLf & "Domain: " & strDomain

    strResult = strResult & VbCrlf &  "#Total Records Found (other accounts): " & objRecordSet.RecordCount & VbCrlf
    AddressCount = 0

       While Not objRecordSet.EOF 'Iterate through the search results
 
            strUserDN = objRecordSet.Fields("distinguishedName")     'Get User's distinguished name from Recordset into a string
            set objUser= GetObject("LDAP://"& strUserDN & "")         'Use string to bind to user object
           


                       strResult = strResult & VbCrlf &  "cn: " & objUser.cn
                       strResult = strResult & VbCrlf &  "mail: " & objUser.mail
                       arrProxyAddresses = objRecordSet.Fields("proxyAddresses")
                       If IsArray(objRecordSet.Fields("proxyAddresses")) Then
                       strResult = strResult & VbCrLf & "Proxy Addresses"
               
                          For Each ProxyAddress in arrProxyAddresses
                         
                            'Sub: Check X400
                             If InStr(ProxyAddress, strX400Search) <> 0 Then
                                    'Wscript.Echo "#This was an x400"
                                 Else
                                     strResult = strResult & VbCrlf &  proxyAddress
                              End If   'Ends loop for X400 address
                Next

            Else
                strResult = strResult & VbCrlf &  "#Object does not have proxy addresses"
            End If
                strResult = strResult &  VbCrLf

     objRecordSet.MoveNext
Wend

'*************************************
'Begin second query for users
varDisabledCounter = 0                  

'Execute search command to look for user
    objCommand.CommandText = _
      "<" & strADPath & ">" & ";(&(objectClass=user)(mail=*))" & ";distinguishedName,displayName,mail,proxyAddresses;subtree"

    'Execute search to get Recordset
    Set objRecordSet = objCommand.Execute
   
    strResult = strResult & vbCrlf &  "#Users"
    strResult = strResult & VbCrlf &  "#Total Records Found (users): " & objRecordSet.RecordCount & VbCrlf
   


       While Not objRecordSet.EOF 'Iterate through the search results
            strUserDN = objRecordSet.Fields("distinguishedName")     'Get User's distinguished name from Recordset into a string
            set objUser= GetObject("LDAP://"& strUserDN & "")         'Use string to bind to user object
           
           
            If objUser.AccountDisabled = TRUE Then                    'If User account disabled, then skip proxy address enum
               varDisabledCounter = varDisabledCounter + 1
               strResult2 = strResult2 & VbCrLf & varDisabledCounter & " " & objUser.displayName & VbCrLf
               
               strResult2 = strResult2 & "cn: " & objUser.cn
                       strResult2 = strResult2 & VbCrlf &  "mail: " & objUser.mail
                       arrProxyAddresses = objRecordSet.Fields("proxyAddresses")
                       If IsArray(objRecordSet.Fields("proxyAddresses")) Then
                       strResult2 = strResult2 & VbCrLf & "Proxy Addresses"
                       
               
                          For Each ProxyAddress in arrProxyAddresses
                            'Sub: Check X400
                             If InStr(ProxyAddress, strX400Search) <> 0 Then
                                    'Wscript.Echo "#This was an x400"
                                 Else
                                     strResult2 = strResult2 & VbCrlf &  proxyAddress
                                 AddressCount = AddressCount + 1
                              End If   'Ends loop for X400 address
                          Next
                              Else
                                  strResult2 = strResult2 & VbCrLf &  "#Object does not have proxy addresses"
                          End If
                              strResult2 = strResult2 &  VbCrLf
               
               
               
               
               
            Else
           


                       strResult = strResult & VbCrlf &  "cn: " & objUser.cn
                       strResult = strResult & VbCrlf &  "mail: " & objUser.mail
                       arrProxyAddresses = objRecordSet.Fields("proxyAddresses")
                       If IsArray(objRecordSet.Fields("proxyAddresses")) Then
                       strResult = strResult & VbCrLf & "Proxy Addresses"
                         
                          For Each ProxyAddress in arrProxyAddresses
                            'Sub: Check X400
                             If InStr(ProxyAddress, strX400Search) <> 0 Then
                                    'Wscript.Echo "#This was an x400"
                                 Else
                                     strResult = strResult & VbCrlf &  proxyAddress
                                 AddressCount = AddressCount + 1
                              End If   'Ends loop for X400 address
                          Next
                              Else
                                  strResult = strResult & VbCrLf &  "#Object does not have proxy addresses"
                          End If
                              strResult = strResult &  VbCrLf
               
          End If   'End check for disabled user
           
     objRecordSet.MoveNext
Wend  'End second query for users

             
strResult = "Users, Groups & Contacts" & VbCrLf & "-------------------------" & VbCrLf & strResult
strResult = strResult & VbCrLf & "Disabled Users" & VbCrLf & "-------------------------" & VbCrLf & strResult2
WScript.Echo strResult

'Output to a text file
Set objFileSystem = CreateObject("Scripting.FileSystemObject")
Set objOutputFile = objFileSystem.CreateTextFile("C:\proxyaddresses.txt")
objOutputFile.Write strResult

=======================================================================

You should be able to make some mods to the output file (cscript %script% > %destination%

And import through ldfe
     
   


           




0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

As with any other System Center product, the installation for the Authoring Tool can be quite a pain sometimes. This article serves to help you avoid making these mistakes and hopefully save you a ton of time on troubleshooting :)  Step 1: Make sur…
We are happy to announce a brand new addition to our line of acclaimed email signature management products – CodeTwo Email Signatures for Office 365.
The video tutorial explains the basics of the Exchange server Database Availability groups. The components of this video include: 1. Automatic Failover 2. Failover Clustering 3. Active Manager
The viewer will learn how to use a discrete random variable to simulate the return on an investment over a period of years, create a Monte Carlo simulation using the discrete random variable, and create a graph to represent the possible returns over…

919 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

15 Experts available now in Live!

Get 1:1 Help Now