Solved

VPN and RSA Authentication simulation

Posted on 2011-09-08
12
658 Views
Last Modified: 2012-05-12
I want to simulate RSA authentication in the Lab.

I have few 2600 routers and 3550 switches and a PC, is there a way to set up a lab for this purpose, simulating End users that comes through VPN and should first authenticate through RSA.

I don't have internet connection in the Lab.

Thanks
0
Comment
Question by:jskfan
  • 6
  • 6
12 Comments
 
LVL 35

Accepted Solution

by:
Ernie Beek earned 500 total points
ID: 36501078
Are you thinkinh about something like sercurid? You might need a second pc then to run the RSA server on.

For the config, have a look at: http://www.rsa.com/rsasecured/guides/imp_pdfs/Cisco_Router_VPN_12_4_AuthMan61.pdf
and see if that helps you.
0
 

Author Comment

by:jskfan
ID: 36501107
Is there a free RSA server to use?
0
 
LVL 35

Assisted Solution

by:Ernie Beek
Ernie Beek earned 500 total points
ID: 36501131
Well some time ago I got a test package straight from RSA. It contained the software and two tokens (valid for a couple of months). I'm not sure if they still do that, but you might want to inquire at RSA.
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 

Author Comment

by:jskfan
ID: 36501336
I wonder if there is RSA that can be located in a tftp server, and the router will check the user credentials against the RSA.

0
 
LVL 35

Assisted Solution

by:Ernie Beek
Ernie Beek earned 500 total points
ID: 36501364
Tftp has no provisions for authentication, so that won't work I'm afraid.
0
 

Author Comment

by:jskfan
ID: 36501378
do you have any link to RSA server to install on my PC?
0
 
LVL 35

Assisted Solution

by:Ernie Beek
Ernie Beek earned 500 total points
ID: 36501446
No direct download link, but you can apply for an evaluation version here: http://rsa.com/poc2/rsa-form-holder-sid.htm?asset_title=Web:%20SID%20Eval&asset_id=SecurID%20Eval&asset_url
0
 

Author Comment

by:jskfan
ID: 36501474
Thanks , do you know which MS OS that the Secure ID can be installed on?
0
 

Author Comment

by:jskfan
ID: 36501476
I have windows 7 Home premium
0
 
LVL 35

Assisted Solution

by:Ernie Beek
Ernie Beek earned 500 total points
ID: 36501502
Mmmmm, I'm afraid you'll at least need 2003 server for that (or RHEL 4.0-1).......
0
 

Author Closing Comment

by:jskfan
ID: 36509070
Thanks..........I will ses that
0
 
LVL 35

Expert Comment

by:Ernie Beek
ID: 36509113
Good luck, thx for the points :)
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Upgrade firmware on Engenius BH-ENS202Wi-Fi router 5 39
VPN Access to Network 4 31
clear arp 1 30
2 routers and 1 public IP Address. 10 41
The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

773 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question