Solved

How do I change the order of an ACL on a Foundry Router

Posted on 2011-09-08
2
234 Views
Last Modified: 2012-05-12
Hi,

I am trying to change the order of my ACL 110  rules on a Foundry Router and the only suggestion I have received is to edit the list in a text editor. Unfortunately, this involves blowing away the whole list and adding it back in. That scares me and I was wondering if anyone know another way???

Thanks in advance
0
Comment
Question by:mschmell1
2 Comments
 
LVL 32

Accepted Solution

by:
harbor235 earned 500 total points
ID: 36509611

Thats how you have to do it,


harbor235 ;}
0
 

Author Comment

by:mschmell1
ID: 36588943
Just a side note. You can remove all the rules and add them back in the order you like in one move. That way the time without ACL rules is very minimal. Thanks for your help Harbor235!
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
RIP Routing 5 59
Adding switches as opposed to running cables 4 87
Upgrade firmware on Engenius BH-ENS202Wi-Fi router 5 19
NAS with google authentication 6 51
We've been using the Cisco/Linksys RV042 for years as: - an internet Gateway - a site-to-site VPN device - a leased line site-to-site subnet-to-subnet interface (And, here I'm assuming that any RV0xx behaves the same way as an RV042.  So that's …
Getting hacked is no longer a matter or "if you get hacked" — the 2016 cyber threat landscape is now titled "when you get hacked." When it happens — will you be proactive, or reactive?
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

947 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

23 Experts available now in Live!

Get 1:1 Help Now