Solved

Can't access management interface on San

Posted on 2011-09-08
2
447 Views
Last Modified: 2013-11-14
Hello,

Our data center had an outage, it took 2 hours before power was up. The IBM DS4300 (SAN) might have booted up first before DCHP and switches. The SAN has a static IP but I am not able to open Management Interface. Any suggestions?
0
Comment
Question by:Tanus Sacin
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 4

Accepted Solution

by:
klodefactor earned 500 total points
ID: 36507741
Connect to the serial console using a null modem cable.  After logging in, type "netCfgShow" to see the current network configuration.  netCfgSet is used to change the configuration if necessary.  More details available at http://user-techdocs.blogspot.com/2010/03/how-to-connect-to-ds4000-system-using.html

--klodefactor
0
 

Author Closing Comment

by:Tanus Sacin
ID: 36537650
Great ! thanks!
0

Featured Post

Optimizing Cloud Backup for Low Bandwidth

With cloud storage prices going down a growing number of SMBs start to use it for backup storage. Unfortunately, business data volume rarely fits the average Internet speed. This article provides an overview of main Internet speed challenges and reveals backup best practices.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Ever notice how you can't use a new drive in Windows without having Windows assigning a Disk Signature?  Ever have a signature collision problem (especially with Virtual Machines?)  This article is intended to help you understand what's going on and…
I previously wrote an article addressing the use of UBCD4WIN and SARDU. All are great, but I have always been an advocate of SARDU. Recently it was suggested that I go back and take a look at Easy2Boot in comparison.
This video teaches viewers how to encrypt an external drive that requires a password to read and edit the drive. All tasks are done in Disk Utility. Plug in the external drive you wish to encrypt: Make sure all previous data on the drive has been …
This tutorial will walk an individual through the process of installing the necessary services and then configuring a Windows Server 2012 system as an iSCSI target. To install the necessary roles, go to Server Manager, and select Add Roles and Featu…

752 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question