SBS 2008 Console

Posted on 2011-09-08
Last Modified: 2012-10-22
I am experiencing some problems with SBS console, when I am in Backup/ And Storage and trying to move Users Redirected Documents Data i get an error that the Move Data Wizard has stopped working. The following info is what shows in the problem details:
  Stopped working

Problem signature:
  Problem Event Name:      CLR20r3
  Problem Signature 01:      movedata.exe
  Problem Signature 02:      6.0.5601.0
  Problem Signature 03:      48a22618
  Problem Signature 04:      MoveData
  Problem Signature 05:
  Problem Signature 06:      48a22618
  Problem Signature 07:      b
  Problem Signature 08:      366
  Problem Signature 09:      System.IO.FileNotFoundException
  OS Version:      6.0.6002.
  Locale ID:      1033

Read our privacy statement:
Question by:telcoengineer
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 5
  • 5

Author Comment

ID: 36507897
I found an article that recommends repairing the SBS console by going to Control Panel/Programs and Features, change Windows Small Business 2008/Console Repair which wants to run SBS.msi from windows dvd2. when I do this i receive the following error:

The installer has experienced an unexpected error installing this package. This may indicate a problem with this package. The error code is 2920.

I have used two different disks and still the same error. I rebooted the server and still the same problem.
LVL 27

Expert Comment

ID: 36512369

Author Comment

ID: 36514926
Thank you for the post Davorin, I have read that article and went through it completely. All of my user templates are created and working fine though. I have no problems with the users area of SBS console, mine is with the disk storage area and trying to use the  folder redirections wizard.
I did not see any specific resolutions to the error 2920, I am using the 2nd windows DVD and have also copied the content to the server before running the repair, and I pointed the repair to the saved files and still get the same results.

Any other ideas? Imsee lots of references to error 2920 on the net but can't seem to find any specific resolution.
Are your AD admin tools letting you down?

Managing Active Directory can get complicated.  Often, the native tools for managing AD are just not up to the task.  The largest Active Directory installations in the world have relied on one tool to manage their day-to-day administration tasks: Hyena. Start your trial today.

LVL 27

Expert Comment

ID: 36516032
Here I have found another post. Take look at CrisHanna suggestions.
They are quite basic, but they can help you determine the health of your server and solve many problems.

How many network cards does your SBS server see?
LVL 27

Expert Comment

ID: 36516039
Please also check if “Updates Services”  and “Windows Update” service is running and set to automatic.

Accepted Solution

telcoengineer earned 0 total points
ID: 37174833
I haved poured over multiple documents and tried all suggestions but still no resolution. I called Microsoft and after 3 hours they suggested that I rebuild the server. So I rebuilt the server and the problem was resolved.

Author Closing Comment

ID: 37194363
all of the other suggestions were good but did not resolve the problem
LVL 27

Expert Comment

ID: 37178681
I'm sorry that I was not able to help you to solve the problem. Lets hope the problem will not repeat. Good luck!

Expert Comment

by:Om Joshi
ID: 38522154
But, rebuild the server, is not a solution when someone has only one server and when its in the production line.

I would like to know another solution. My problem started when i used the link to bring all the users from active directory. the console brought all the users i wanted but after that it started causing crash whenever i tried to do anything through console.

i would like to know if anyone can help me.

awaiting reply.
LVL 27

Expert Comment

ID: 38523730
You have posted a comment in already closed question. Me and telcoengineer are the only ones who can see your comment.
To get help by experts please post a new question.

Author Comment

ID: 38523842

i have never received a resolution for this problem either. if you find one, can you please post back?

thank you

Featured Post

Optimize your web performance

What's in the eBook?
- Full list of reasons for poor performance
- Ultimate measures to speed things up
- Primary web monitoring types
- KPIs you should be monitoring in order to increase your ROI

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Background Information Recently I have fixed file server permission issues for one of my client. The client has 1800 users and one Windows Server 2008 R2 domain joined file server with 12 TB of data, 250+ shared folders and the folder structure i…
This article explains how to install and use the NTBackup utility that comes with Windows Server.
This tutorial will walk an individual through locating and launching the BEUtility application and how to execute it on the appropriate database. Log onto the server running the Backup Exec database. In a larger environment, this would generally be …
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
Suggested Courses

623 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question