Solved

Wifi HP Photosmart C4383, I have to restart every time to connect !

Posted on 2011-09-10
6
425 Views
Last Modified: 2012-05-12
Hello,

I have printer HP Photosmart C4383.

It has wifi, I can print without wire connect.

if it is close. and I want to print. I have to restart my laptop then to connect with the Printer.

Is there other way? or I have to open the printer every time before laptop. but I don't want because not every time I use it.

I am using Windows 7 , HP laptop Pavilion dv6.

Thanks :)
0
Comment
Question by:mb4ever
  • 3
  • 3
6 Comments
 
LVL 88

Expert Comment

by:rindi
ID: 36516160
I'm not sure what you mean with "open the printer every time before laptop"?
0
 

Author Comment

by:mb4ever
ID: 36516174
Hello Rindi,

When I want to let the printer works, I have to open the printer first, then open my laptop. So it will be connected with my laptop by wifi.
0
 
LVL 88

Expert Comment

by:rindi
ID: 36516206
I still don't understand what you mean with "opening" the printer. Do you have to open the printing cartridge compartment, or the scanner surface or what? Or with "opening", do you really mean you have to turn it on?
0
Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

 

Author Comment

by:mb4ever
ID: 36516237
Hello Rindi.
I mean ( opening ) is ( ON ) . Let is works . Click POWER ON :)
0
 
LVL 88

Accepted Solution

by:
rindi earned 500 total points
ID: 36516310
OK, I understand now. How is your network setup, is there a wireless Access Point or Router? Or is the PC only connecting to the printer and nothing else via wireless? Is the Printer's Wireless Interface setup to use a static or a dynamic IP Address?
0
 

Author Closing Comment

by:mb4ever
ID: 36813228
Thanks :) solve it
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

If your business is like most, chances are you still need to maintain a fax infrastructure for your staff. It’s hard to believe that a communication technology that was thriving in the mid-80s could still be an essential part of your team’s modern I…
This paper addresses the security of Sennheiser DECT Contact Center and Office (CC&O) headsets. It describes the DECT security chain comprised of “Pairing”, “Per Call Authentication” and “Encryption”, which are all part of the standard DECT protocol.
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

839 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question