Solved

show boot on Cisco 6000

Posted on 2011-09-12
1
383 Views
Last Modified: 2012-05-12
When I input show boot on our 6509, I get the following line at the end of the output: "Standby is not present."

I'm assuming that this means that a secondary / backup boot image is not specified. Is this correct? How can I resolve this output?
0
Comment
Question by:c-h-r-i-s-t-o-p-h
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
1 Comment
 
LVL 26

Accepted Solution

by:
Soulja earned 500 total points
ID: 36524613
How many supervisors in the 6509 chassis? I think this means there is no image on the stanby Supervisor or not standy supervisor.
0

Featured Post

Building an interactive eFuture classroom

Watch and learn how ATEN provided a total control system solution including seamless switching matrix switch, HDBaseT extenders, PDU, lighting control to build an interactive eFuture classroom.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Tired of waiting for your show or movie to load?  Are buffering issues a constant problem with your internet connection?  Check this article out to see if these simple adjustments are the solution for you.
Network ports are the threads that hold network communication together. They are an essential part of networking that can be easily ignore or misunderstood, my goals is to show those who don't have a strong network foundation how network ports opera…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

738 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question