Solved

What is the answer to this question

Posted on 2011-09-13
2
494 Views
Last Modified: 2012-05-12
The CertKiller.com network currently has three departments and CertKiller.com plans to add a
fourth in the future. During the course of the day you receive instruction from CertKiller.com to
assign a subnet for the departments using the global address prefix 3FFA:FF2B:4D:B000::/41
assigned to you.
What should you do?
A. You should consider having the IPv6 address 3FFA:FF2B:4D:C000::/43 for the added
department.
B. You should consider having the IPv6 address 3FFA:FF2B:4D:F000::/45 for the added
department.
C. You should consider having the IPv6 address 3FFA:FF2B:4D:C800::/43 for the added
department.
D. You should consider having the IPv6 address 3FFA:FF2B:4D:B400::/43 for the added
department.
0
Comment
Question by:Zak
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 19

Accepted Solution

by:
bevhost earned 500 total points
ID: 36534233
Again.

E) none of the above.

or
 
F) any of the above

depending on how you read between the lines.

3ffa:ff2b:4d:b000::/52 describes all the addresses from 3ffa:ff2b:004d:b000:0000:0000:0000:0000 - 3ffa:ff2b:004d:bfff:ffff:ffff:ffff:ffff

3ffa:ff2b::/41 describes all the addresses from
3ffa:ff2b:0000:0000:0000:0000:0000:0000 - 3ffa:ff2b:007f:ffff:ffff:ffff:ffff:ffff

normal practice is to use the starting address when specifiying a block.

A) should be 3ffa:ff2b:40:0:0:0:0:0/43
B) should be 3ffa:ff2b:48:0:0:0:0:0/45
C) should be 3ffa:ff2b:40:0:0:0:0:0/43
D) should be 3ffa:ff2b:40:0:0:0:0:0/43

Since A, C & D are the same maybe B is the answer but who would really know.

Good luck!
0
 

Author Closing Comment

by:Zak
ID: 36555241
thanks
0

Featured Post

Free Tool: Site Down Detector

Helpful to verify reports of your own downtime, or to double check a downed website you are trying to access.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Issue: One Windows 2008 R2 64bit server on the network unable to connect to a buffalo Device (Linkstation) with firmware version 1.56. There are a total of four servers on the network this being one of them. Troubleshooting Steps: Connect via h…
Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
NetCrunch network monitor is a highly extensive platform for network monitoring and alert generation. In this video you'll see a live demo of NetCrunch with most notable features explained in a walk-through manner. You'll also get to know the philos…
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…

718 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question