Solved

How to Upgrade CIsco IOS with my present configuration

Posted on 2011-09-14
5
626 Views
Last Modified: 2012-05-12
Hi All,

I have Cisco UC520 router  with CUE 4.2, it's 3 years Old, I want to Upgrade it, So i buy New Software with CUE
uc500-advipservicesk9-mz.124-11.XW10
CUE 8.2.0
CCA 3.1

Now I want to change CUE version also IOS with my Existing Configuration
Can anyone step by step  help me
Please look attached flash details I have below files in Flash
Now just want to Upgrade IOS & CUE,

I have Flash Card reader, but I can't Understand where to start,
I don't want to Configure it from the begining,
It should be work with my present configuration after change IOS & CUE


Thanks is Advance
0
Comment
Question by:vikrantambhore
  • 3
  • 2
5 Comments
 
LVL 13

Accepted Solution

by:
luc_roy earned 500 total points
ID: 36541663
0
 
LVL 6

Author Comment

by:vikrantambhore
ID: 36541914
Ok After change IOS, Does I need to configure from begining or it will boot with my present configuration ?



Regards
0
 
LVL 13

Expert Comment

by:luc_roy
ID: 36546922
it should keep your current but if I were you I would back up your current in case you need it.
0
 
LVL 6

Author Comment

by:vikrantambhore
ID: 36547277
I have Flash Card reader, can  delete present Image & copy & paste new paste Image, also there is lot's of files, Does need to keep it in Flash or can i delete it ?
0
 
LVL 13

Expert Comment

by:luc_roy
ID: 36548104
I would not delete any other files, you should have files for your phone firmware, phone setings, etc...
0

Featured Post

Free learning courses: Active Directory Deep Dive

Get a firm grasp on your IT environment when you learn Active Directory best practices with Veeam! Watch all, or choose any amount, of this three-part webinar series to improve your skills. From the basics to virtualization and backup, we got you covered.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article will cover setting up redundant ISPs for outbound connectivity on an ASA 5510 (although the same should work on the 5520s and up as well).  It’s important to note that this covers outbound connectivity only.  The ASA does not have built…
Article by: user_n
How Sip Phone (User Agent) works and communicates with sip servers 1.  There is a sip server and a sip registrar.  The sip server and sip registrar can be one server or two different servers. The sip registrar is the server on which it is record…
Both in life and business – not all partnerships are created equal. As the demand for cloud services increases, so do the number of self-proclaimed cloud partners. Asking the right questions up front in the partnership, will enable both parties …
As a trusted technology advisor to your customers you are likely getting the daily question of, ‘should I put this in the cloud?’ As customer demands for cloud services increases, companies will see a shift from traditional buying patterns to new…

828 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question