Solved

Dedicated bandwidth allocation for Exclausive IPSec VPN Traffic

Posted on 2011-09-15
5
665 Views
Last Modified: 2012-05-12
Hi,

We have a 30MB Internet link,We want to distribute 10 MB for two VPN Tunnels ( Both IPSec and Site-Site)  with each 5MB so pls provide where  and how to configure ..

My scenario is

                                 Internet Router
                                        |
                                 ASA Firewall
                                        |
                         VPN Clients and Normal Users

Do we have to do in Internet Router or ASA Firewall , which is the best place to configure

Regards
Ramu
0
Comment
Question by:RAMU CH
  • 3
  • 2
5 Comments
 
LVL 1

Author Comment

by:RAMU CH
ID: 36547087
Hi,

if it is not appropriate category,will you pls forward to the respective category

Regards
Ramu
0
 
LVL 35

Expert Comment

by:Ernie Beek
ID: 36549657
I'm not sure if there is an easy way to reserve bandwidth. You can priorize traffic though:

priority-queue outside
 class-map outside-class-vpn
   match tunnel-group name_of_tunnel_group
   match flow ip destination-address
 policy-map outside-policy-vpn
   class outside-class-vpn
     priority
 service-policy outside-policy-vpn interface outside
0
 
LVL 1

Author Comment

by:RAMU CH
ID: 36558116
Thanks Ernibeek,wl configure and check

Regards
Ramu
0
 
LVL 35

Accepted Solution

by:
Ernie Beek earned 500 total points
ID: 36558551
You're welcome, let me know if this works for you.
0
 
LVL 1

Author Closing Comment

by:RAMU CH
ID: 36915142
Thanks
0

Featured Post

Efficient way to get backups off site to Azure

This user guide provides instructions on how to deploy and configure both a StoneFly Scale Out NAS Enterprise Cloud Drive virtual machine and Veeam Cloud Connect in the Microsoft Azure Cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
Cisco Any Connect Client 5 37
OSPF Cost 2 51
Cisco 1811W VLAN configuration problem 3 14
2012 r2 branch office DNS 2 19
Have you experienced traffic destined through a Cisco ASA firewall disappears and you do not know if the traffic stops in the firewall or somewhere else? The solution is the capture feature. This feature was released in 6.2(1) and works in all firew…
From Cisco ASA version 8.3, the Network Address Translation (NAT) configuration has been completely redesigned and it may be helpful to have the syntax configuration for both at a glance. You may as well want to read official Cisco published AS…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

864 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

20 Experts available now in Live!

Get 1:1 Help Now