Solved

Browse the web from colo site through the LAN firewall without web proxy?

Posted on 2011-09-15
2
340 Views
Last Modified: 2012-06-21
We would like to be able to, from the servers at our colo facility, browse the Internet using our home office LAN gateway (similar to how our home office PCs would browse).  In this scenario, traffic would have to flow from a colo server through the Cisco 1941 router located at the colo facility, across the point-to-point connection, and then through our SonicWall NSA 3500 at the home office.

There is no web proxy in the equation, so at this point I'm looking for some combination of routes to add to the Cisco and/or the colo servers and rules to add the SonicWall.  I will attempt to add some pertinent info below:

Colo Server
IP = 192.168.204.3
MASK = 255.255.255.0
GATEWAY = 192.168.204.1

Colo Router - Cisco 1941
Colo Interface IP = 192.168.204.1
P2P Interface IP = 192.168.100.1

SonicWall NSA 3500
Colo Interface IP = 192.168.100.2
WAN Interface IP = 207.188.246.188
LAN Interface IP = 192.168.200.200

I'm sure I've left out some necessary detail, so please help me fill in the gaps.  Any insight you can offer is greatly appreciated -- thanks!
0
Comment
Question by:MapleLife
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 4

Accepted Solution

by:
AnthonyHamon earned 500 total points
ID: 36544963
From the information you have given, I believe that you need a default static route on your colo router, pointing to the SonicWall NSA 3500 device:
ip route 0.0.0.0 0.0.0.0 192.168.100.2
0
 

Author Comment

by:MapleLife
ID: 36545246
NICE -- that did it.  THANK YOU!!
0

Featured Post

Efficient way to get backups off site to Azure

This user guide provides instructions on how to deploy and configure both a StoneFly Scale Out NAS Enterprise Cloud Drive virtual machine and Veeam Cloud Connect in the Microsoft Azure Cloud.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Join Greg Farro and Ethan Banks from Packet Pushers (http://packetpushers.net/podcast/podcasts/pq-show-93-smart-network-monitoring-paessler-sponsored/) and Greg Ross from Paessler (https://www.paessler.com/prtg) for a discussion about smart network …
In this article, I am going to show you how to simulate a multi-site Lab environment on a single Hyper-V host. I use this method successfully in my own lab to simulate three fully routed global AD Sites on a Windows 10 Hyper-V host.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

749 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question