Solved

ASA 5505 dual/reduntancy VPN tunnel

Posted on 2011-09-15
2
230 Views
Last Modified: 2012-05-12
We are trying to create a redundant tunnel with a cisco 5505 ASA version 8.3. So if we lose data on the primary circuit it will pick on the backup secondary circuit. There is a tunnel from the home office to the remote branch. How would it be configured on both ends?
0
Comment
Question by:Network IT
2 Comments
 
LVL 33

Accepted Solution

by:
MikeKane earned 500 total points
ID: 36546410
In the ASA's VPN config, you would have a line like:

set peer x.x.x.x  


You can simply add in a 2nd IP to that line:

set peer x.x.x.x y.y.y.y  

If the 1st is unresponsive, it will try the next.    

I don't think that will be a stateful failover, so sessions would have to be reestablished ....   but not 100% sure on that.  

0
 

Author Closing Comment

by:Network IT
ID: 37038033
Still working on a solution.
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Juniper VPN devices are a popular alternative to using Cisco products. Last year I needed to set up an international site-to-site VPN over the Internet, but the client had high security requirements -- FIPS 140. What and Why of FIPS 140 Federa…
I've written this article to illustrate how we can implement a Dynamic Multipoint VPN (DMVPN) with both hub and spokes having a dynamically assigned non-broadcast multiple-access (NBMA) network IP (public IP). Here is the basic setup of DMVPN Pha…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

919 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

15 Experts available now in Live!

Get 1:1 Help Now