• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 3262
  • Last Modified:

Security Tab Missing in SNMP Service

Hello all,

I have Windows 2008 Hyper V Core Server and I used the following command to install the SNMP service:

start /w ocsetup SNMP-SC

The service was successfully installed, but when I go to the properties there is no Secuirty Tab. I am trying to set the community string.

I used Computer Management on a Windows 7 machine to connect to the Core Server's Servcies.

I have restarted the server several times and I have even shut it down completely. Any assistance would greatly be appreciated.

Thanks!
0
itsupportmd
Asked:
itsupportmd
1 Solution
 
65tdCommented:
May have to edit the community strings in the registry, under:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\SNMP

Entering community strings:
http://msdn.microsoft.com/en-us/library/aa915216.aspx
0
 
itsupportmdAuthor Commented:
Thanks for the resonse. Once I restarted the server, it took a little while but the tab finally showed up. Altough, I think your method may have worked as well..

Thanks again for the response.
0

Featured Post

Get your Conversational Ransomware Defense e‑book

This e-book gives you an insight into the ransomware threat and reviews the fundamentals of top-notch ransomware preparedness and recovery. To help you protect yourself and your organization. The initial infection may be inevitable, so the best protection is to be fully prepared.

Tackle projects and never again get stuck behind a technical roadblock.
Join Now