Solved

VPN on cisco 2911

Posted on 2011-09-16
3
1,552 Views
Last Modified: 2012-05-12
Hi
I have cisco 2911 ver 15.0(1)M3, IOS based.  I want to install sdm on my laptop will it also install sdm on my router?  If yes how can I find out if its the latest version.  I just downloaded ver25 from the cisco website, how and where on the router I would find the version of this.  I have no idea if its installed on the router or not.  How can I check.  
Also I need step guide to install VPN on this router.
Help plz
0
Comment
Question by:amanzoor
  • 2
3 Comments
 
LVL 10

Accepted Solution

by:
SuperTaco earned 500 total points
ID: 36552240
you can install SDM on your workstation OR the router.  the install for the router is usually a different download.  Most people are using CCP now (Cisco configuration professional.)  It may provide an easier interface to set things up with.  Your router should also come with a web interface.  if not please type the following commands

Router# configure terminal
Router(config)# ip http server
Router(config)# ip http secure-server
Router(config)# ip http authentication local
Router(config)# ip http timeout-policy idle 600 life 86400 requests 10000

What type of VPN are you implementing?  site-to-site, PPTP, or SSL?
0
 
LVL 4

Author Comment

by:amanzoor
ID: 36552299
SuperTaco:
I would like to install SDM (new name CCP) on my laptop.  Yes true my router came with http server, and then I disabled it.  Good that you mentioned the commands to re enable it.
Please suggest which type of VPN:  I want my clients (windows 7 machines) to establish VPN connection from their laptops.  May be I have to download VPN client to the laptops from cisco?  I would like my clients to be authenticated via AD.  I am running server 2008 ent edition x32 bit network.  I am really keen to see the interface on this router 2911 VPN and how it works.  Will SSL? type work for me?  What are easy steps/commands to make this VPN on 2911?
Help  
0
 
LVL 10

Expert Comment

by:SuperTaco
ID: 36552596
SSL will work very well, you will just have to change the http/https port you connect to, to manage your router.  (ip http server "portnumber")  You will need to do this for CCP.  (I think)

SSL Vpn's are becoming very popular because it's a web portal AND a VPN with a client.  You can limit certain users to just a web portal with specific shared oflders and weblins, and allow other employees to download a client.  

here's a link on how to set up the SSL VPN

http://www.cisco.com/en/US/products/ps6496/products_configuration_example09186a0080720346.shtml

what like to do with this is allow users to download the any connect client from the web portal.  This way everything is automatic.  

here's a link on how to integrate your VPN with AD.  (Well the link has links to a bunch of options for integrating)

http://www.petri.co.il/forums/showthread.php?t=12907

0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

In this tutorial I will show you with short command examples how to obtain a packet footprint of all traffic flowing thru your Juniper device running ScreenOS. I do not know the exact firmware requirement, but I think the fprofile command is availab…
Hello , This is a short article on how would you go about enabling traceoptions on a Juniper router . Traceoptions are similar to Cisco debug commands but these traceoptions are implemented in Juniper networks router . The following demonstr…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

760 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

18 Experts available now in Live!

Get 1:1 Help Now