Solved

Configuring RSA on ISA 2004 for Remote Desktop Web Access

Posted on 2011-09-19
1
383 Views
Last Modified: 2012-06-27
Hello,

I am trying to get RSA working for a 2 factor authentication for RDWeb. Here is my set-up

Internal Network

- 2 x Terminal Server (2008 R2) in a FARM
- 1 x Gateway Server (Web access installed)
- 1 x RD Connection Broker

DMZ network

 - ISA 2004 - (2003 Std)

I have configured everything to work correctly with regards to the terminal servers, certificates, remote apps and also ISA is publishing the Gateway server and is accessible both internally and externally fine.

However I have now been asked to  implement RSA SecureID to work with this setup.
We have a RSA server currently in place but I have no experience on how this would work for RDWeb and don't know how to go about configuring this for my scenario. I have searched around and have found info relating to ISA 2006 but nothing for ISA 2004

Any help greatly appreciated  
0
Comment
Question by:7demonsrising
1 Comment
 
LVL 10

Accepted Solution

by:
simonlimon earned 500 total points
ID: 36566466
Create a Listener on ISA,

- Create a Listener on ISA, require RADIUS Authentication on the Listener,
- Create a web publishing rule for the for the http://tsfarm/rdweb
- Use the listener for the rule,

This should help with ISA
http://www.isaserver.org/tutorials/ISA2004-RADIUS-Authentication-Web-Publishing-Rules-Part2.html

Can RSA be used as a RADIUS server?

But the result will be the following,

User will first be prompted for their OTP, when they login to ISA, they will be asked for Active Directory Credentials.


0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Scenario:  You do full backups to a internal hard drive in either product (SBS or Server 2008).  All goes well for a very long time.  One day, backups begin to fail with a message that the disk is full.  Your disk contains many, many more backups th…
A safe way to clean winsxs folder from your windows server 2008 R2 editions
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
This tutorial will walk an individual through the steps necessary to enable the VMware\Hyper-V licensed feature of Backup Exec 2012. In addition, how to add a VMware server and configure a backup job. The first step is to acquire the necessary licen…

821 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question