HB-IT
asked on
ESXi Ethernet Adapter not detected
Hello,
I am currently trying to install 2 E1G44HT into my ESXi server 4.1. The good news is that it booted up after I installed them, the problem is I don't think they detected them in vsphere. When go to the configuration tab then click on networking, then properties and network adapters and add it does not show any new cards. I also checked Network Adapters under hardware and it only showed the 2 nic's on the motherboard. I checked to see if they were working by plugging a cable into them and they did light up but I am lost on how to get these detected into esxi and also setting them up.
I am currently trying to install 2 E1G44HT into my ESXi server 4.1. The good news is that it booted up after I installed them, the problem is I don't think they detected them in vsphere. When go to the configuration tab then click on networking, then properties and network adapters and add it does not show any new cards. I also checked Network Adapters under hardware and it only showed the 2 nic's on the motherboard. I checked to see if they were working by plugging a cable into them and they did light up but I am lost on how to get these detected into esxi and also setting them up.
ASKER
I don't know where the drivers are located and I asked this website if that model number was supported and people were telling me yes.
What is the Part Number and Manufacturer?
Is it a Intel EN Server Adapter I340-T4 Network adapter - PCI Express 2.0 ?
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
ASKER
how do I install these.
you use the vihostupdate.pl vCLI command line tool.
Have you added the new drivers for them from VMware?