Solved

Cisco 2600 Router Fast Ethernet WIC

Posted on 2011-09-19
3
844 Views
Last Modified: 2012-05-12
I need the part number for a fast Ethernet WIC for a Cisco 2600 Router. Does one exist?
0
Comment
Question by:bblang
3 Comments
 
LVL 22

Expert Comment

by:Matt V
ID: 36563232
0
 

Author Comment

by:bblang
ID: 36563571
Do you know of a 2 port solution?
0
 
LVL 8

Accepted Solution

by:
gsmartin earned 500 total points
ID: 36563911
Cisco WIC-2ENET  -  Note this card is dificult to find.  The WIC-1ENET is much more readily available.

Note Cisco WIC-2ENET card was later replaced by the HWIC-2FE, which is only avaialble for the 2800 and 3800 series routers.
http://www.cisco.com/en/US/prod/collateral/routers/ps5854/product_data_sheet0900aecd80581fe6_ps5855_Products_Data_Sheet.html
0

Featured Post

Networking for the Cloud Era

Join Microsoft and Riverbed for a discussion and demonstration of enhancements to SteelConnect:
-One-click orchestration and cloud connectivity in Azure environments
-Tight integration of SD-WAN and WAN optimization capabilities
-Scalability and resiliency equal to a data center

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
BGP Network restrictions 6 46
Open Port Forwarding but still can't connect RDP 9 56
policy based routing with recursive added - Cisco 1 48
ospf neighbors not coming up 6 60
There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
Microservice architecture adoption brings many advantages, but can add intricacy. Selecting the right orchestration tool is most important for business specific needs.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

830 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question