?
Solved

How to configure voice QoS on dell switch

Posted on 2011-09-19
2
Medium Priority
?
1,688 Views
Last Modified: 2012-05-12
Dear Experts,

We use Mitel IP phone, and dell 3548P (as pure layer2 switch) as edge switch, and dell PC6248 as Core (layer3) switch. The Mitel by default will put Priority value 6 on all voice traffic, and priority 3 for voice signalling (call control), and chose vlan 100 as voice vlan. My question is  on edge switch (3548P), which way is the best  to configure QoS for voice, is voice vlan or classofservice; on core switch, which way is the best to configure QoS just for voice.

Highly appreciated your time and help!
0
Comment
Question by:bighippo
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 12

Accepted Solution

by:
atrevido earned 1500 total points
ID: 36717328
The QoS is mostly done on the Router for traffic leaving your local subnet.
This is what I have programmed on my local subnets - I have procurves but since no one answered your question I thought this might help.
vlan 100
   name "VOICE_VLAN"
   untagged A3     <-- this is the address of my call controller
   qos priority 7     <-- in my network all voice is priority 7
   tagged A1-A2,A4-A24,B2-B24,C1-C24,D1-D24,E1-E24,F1-F24   <-- these are combo ports - phone & PC together
   no ip address
   exit

Attached please find the excerpt from the MItel engineering guidelines that show you a complete configuration with QoS on Cisco
Pages-from-33-ENG-R9.0-EN.pdf
0
 

Author Closing Comment

by:bighippo
ID: 36914547
Thanks a lot for your time and help!!!
0

Featured Post

Turn your laptop into a mobile console!

The CV211 Laptop USB Console Adapter provides a direct Laptop-to-Computer connection for fast and easy remote desktop access with no software to install.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is a step by step guide on how to create a basic PTP link using Ubiquiti airOS devices. This guide can be used on the following Ubiquiti AirMAX devices. Nanostation, Bullets, AirBridge, Nanobeam, NanoBridge to name a few. Please review …
If your business is like most, chances are you still need to maintain a fax infrastructure for your staff. It’s hard to believe that a communication technology that was thriving in the mid-80s could still be an essential part of your team’s modern I…
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…
Michael from AdRem Software outlines event notifications and Automatic Corrective Actions in network monitoring. Automatic Corrective Actions are scripts, which can automatically run upon discovery of a certain undesirable condition in your network.…
Suggested Courses

777 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question