Solved

Rules for connect TSM server and clients throug firewall.

Posted on 2011-09-20
2
1,062 Views
Last Modified: 2013-11-17
Hi again

I know all TSM clients connect to TSM server using 1500/TCP, but not sure there's a connection from the TSM to the clients. I need to open this ports on a firewall because the TSM server is along on a new segment.
Please, take in care, all possibles TCP or UDP ports.

Thanks.
0
Comment
Question by:sminfo
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 68

Accepted Solution

by:
woolmilkporc earned 500 total points
ID: 36567222
Hi,

You must open the TCP port which is set with "TSMClientport" in the client's dsm.sys (or the default of 1501) for the client scheduler.
This applies to "SchedMode prompted" in the client's dsm.sys.
The server will contact the client over this port.

With "SchedMode polling" only the client will contact the server, the server will not try to reach the client.

Please note that the "LLAddress" of the client configured on the server (if any, ask your TSM server admin!) must correspond to TCPClientPort.

The above is the only port the server will use.

However, if you want the client to respond to http requests coming from admins using the Web GUI (dsmcad) you must open the port configured with HTTPPort in the cient's dsm.sys (default 1581).

wmp






0
 

Author Closing Comment

by:sminfo
ID: 36567770
OK
I checked some AIXs here and there's not any TSMClientport option on /usr/tivoli/tsm/client/ba/bin/dsm.sys.

 SO , I think we're using the SchedMode pooling. SO, I'll ask to open 1501 and 1580 to the client side and 1500 to the TSM server.

Thanks.
0

Featured Post

Free Tool: Site Down Detector

Helpful to verify reports of your own downtime, or to double check a downed website you are trying to access.

One of a set of tools we are providing to everyone as a way of saying thank you for being a part of the community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In tuning file systems on the Solaris Operating System, changing some parameters of a file system usually destroys the data on it. For instance, changing the cache segment block size in the volume of a T3 requires that you delete the existing volu…
I promised to write further about my project, and here I am.  First, I needed to setup the Primary Server.  You can read how in this article: Setup FreeBSD Server with full HDD encryption (http://www.experts-exchange.com/OS/Unix/BSD/FreeBSD/A_3660-S…
Learn several ways to interact with files and get file information from the bash shell. ls lists the contents of a directory: Using the -a flag displays hidden files: Using the -l flag formats the output in a long list: The file command gives us mor…
Learn how to find files with the shell using the find and locate commands. Use locate to find a needle in a haystack.: With locate, check if the file still exists.: Use find to get the actual location of the file.:
Suggested Courses

626 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question