?
Solved

How to create CSR in Juniper AS2500 VPN appliance?

Posted on 2011-09-20
2
Medium Priority
?
632 Views
Last Modified: 2012-05-12
This is using Juniper AS2500 VPN appliance. I want to have a new SSL certificate with verisign. so I have create a CSR. How to create it in this appliance? I can't access by command...
0
Comment
Question by:MezzutOzil
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
2 Comments
 
LVL 8

Accepted Solution

by:
Shmoid earned 2000 total points
ID: 36570184
What do you mean by:

I can't access by command...

If you have access to the console then just following these instructions from this source http://www.juniper.net/techpubs/en_US/sa7.1/topics/task/operational/secure-access-certificates-signing-request-creating.html:

To create a certificate signing request:

1. In the admin console, choose System > Configuration > Certificates > Device Certificates.
2. Click New CSR.
3. Enter the required information and click Create CSR.
4. Follow the instructions on-screen, which explain what information to send to the CA and how to send it.
5. When you receive the signed certificate from the CA, import the certificate file using the instructions that follow.




To import a signed device certificate created from a CSR:

1. In the admin console, choose System > Configuration > Certificates > Device Certificates.
2. Under Certificate Signing Requests, click the Pending CSR link that corresponds to the signed certificate.
3. Under Import signed certificate, browse to the certificate file you received from the CA and then click Import.
0
 

Author Closing Comment

by:MezzutOzil
ID: 36571199
Excellence
0

Featured Post

Bringing Advanced Authentication to the SMB Market

WatchGuard announces the acquisition of advanced authentication provider, Datablink, with one mission – to bring secure authentication to SMB, mid-market, and distributed enterprises with a cloud-based solution, ideal for resale via their established channel & MSSP community.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

How to set-up an On Demand, IPSec, Site to SIte, VPN from a Draytek Vigor Router to a Cyberoam UTM Appliance. A concise guide to the settings required on both devices
Let’s list some of the technologies that enable smooth teleworking. 
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Windows 10 is mostly good. However the one thing that annoys me is how many clicks you have to do to dial a VPN connection. You have to go to settings from the start menu, (2 clicks), Network and Internet (1 click), Click VPN (another click) then fi…
Suggested Courses

770 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question