Solved

What is "Single Logical Processor Mode" on my bios?

Posted on 2011-09-21
5
1,285 Views
Last Modified: 2013-12-02
This option is enabled
0
Comment
Question by:IT_Fanatic
  • 3
  • 2
5 Comments
 
LVL 7

Expert Comment

by:mrhamen
ID: 36573886
This usually forces your computers os to see your processor as a single core processor in the case where you may have a dual or quad core processor installed.
0
 

Author Comment

by:IT_Fanatic
ID: 36573965
I have a dou core and my issue is my server only sees one core. I used a tool called AMIBCP to look at my bios. This is the settings for my bios. Can you tell me if this is set to read and use a dou core. Thanks
bios.JPG
0
 
LVL 7

Expert Comment

by:mrhamen
ID: 36573985
If you disable the single logical core feature in your bios save the settings and then turn off your computer for 30 seconds and reboot and then run this again you will see both cores.
0
 

Accepted Solution

by:
IT_Fanatic earned 0 total points
ID: 36600872
The OS was the issue. I reinstalled the OS and the 2 cores now show. I think it was a driver corruption.
0
 

Author Closing Comment

by:IT_Fanatic
ID: 36895873
This is what worked for me
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Have you considered what group policies are backwards and forwards compatible? Windows Active Directory servers and clients use group policy templates to deploy sets of policies within your domain. But, there is a catch to deploying policies. The…
Issue: One Windows 2008 R2 64bit server on the network unable to connect to a buffalo Device (Linkstation) with firmware version 1.56. There are a total of four servers on the network this being one of them. Troubleshooting Steps: Connect via h…
This video shows how to use Hyena, from SystemTools Software, to bulk import 100 user accounts from an external text file. View in 1080p for best video quality.

789 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question