Cisco Wirless Bidge Recommendation

Cisco Aironet 1310 Outdoor Access Point/Bridge

Mfg Part #: AIR-BR1310G-A-K9

Hi i m wondnering if any one has experience wiht the above model wilress acces point /bridge.

I m trying to setup a wireless bridge between two buidings roughly 450 feet apart.

I would like to know if the above model would accomplish such task and also do i need to add external antenna to it as the documentation says it has internal 13dbi integrated antenna.

With regards to power since i dont have PoE switch do i need to purchase power injector separately ?


tahnk you
Who is Participating?
Craig BeckConnect With a Mentor Commented:
The 1300 bridges don't use PoE, so you will need to use the LR2 Power Injector that comes with the unit.  This uses co-axial cables to connect to the unit, and is powered by a 48VDC power supply.  This should also come with the unit.

The 1300 will easily cover 450ft.
icdl101Author Commented:
thank you for our quick response
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.