Solved

Need To Readdress Network - AD Consequences?

Posted on 2011-09-21
1
440 Views
Last Modified: 2012-05-12
We need to readdress our current network scheme to a totally different IP address, subnet mask and DG.  We are running a 2008 Domain Controller with DHCP and DNS.  Any major loopholes anyone aware of doing this (apart from the obvious like DHCP address output to clients, etc)?  Particularly, will this affect domain operations (FRS, etc.).
0
Comment
Question by:Steve215
1 Comment
 
LVL 39

Accepted Solution

by:
Adam Brown earned 500 total points
ID: 36577087
For the most part, everything in AD is handled with DNS. It should be noted that you should make sure and create the appropriate subnets in your domain sites and services to match the new setup *before* making the switch. The process for changing IP addresses is to change the address and restart the Netlogon service to update DNS with the new addresses. If that doesn't happen properly, you can run into issues (just so you are aware). There are some applications that don't support IP address changes, so you would want to investigate if that applies to you. You'll also need to go through all of your static DNS records to make sure they match up.
0

Featured Post

Netscaler Common Configuration How To guides

If you use NetScaler you will want to see these guides. The NetScaler How To Guides show administrators how to get NetScaler up and configured by providing instructions for common scenarios and some not so common ones.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The recent Microsoft changes on update philosophy for Windows pre-10 and their impact on existing WSUS implementations.
A safe way to clean winsxs folder from your windows server 2008 R2 editions
This tutorial will give a an overview on how to deploy remote agents in Backup Exec 2012 to new servers. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as connecting to a remote Back…
This tutorial will walk an individual through the steps necessary to join and promote the first Windows Server 2012 domain controller into an Active Directory environment running on Windows Server 2008. Determine the location of the FSMO roles by lo…

831 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question