Solved

Can't ping host on other subnet, only other subets gateway.

Posted on 2011-09-21
4
719 Views
Last Modified: 2012-05-12
Greetings

I'm having an issue with subnetting on my MicroTik router.

I am attempting to have two subnets comunicate with each other. This is something i've done many times before without issue, however tonight stuff just isn't working. :(

Router has 5 ports...

Ext1 1 = WAN
Int1 = Office1 LAN (10.1.20.1/24)
Int2 and 3 = Empty
Int4 = Office2 LAN (10.66.89.1/24)

I am able to ping from a host on Office1 to the gateway on Office2 and thats it. I can not ping anything on Office2 other than the gateway, cant ping any hosts on Office2.

IP / Interface / Route settings: http://i.imgur.com/g4Nmg.png

When i use the ping utility within MicroTik i cannot ping either gateway from the other...

Ping from Int1 to 10.66.89.1 on Int4: http://i.imgur.com/b6iPy.png

Ping from Int4 to 10.1.20.1 on Int1: http://i.imgur.com/f57xg.png

Using the same utility, I can NOT ping From Int1 to 8.8.8.8 (Google's DNS)

I also can NOT ping From Int4 to 8.8.8.8 (Google's DNS)

Here is a screenshot of this. The result is the saem when selecting either interface.

http://i.imgur.com/sIo94.png

The only interface which can ping it is Ext1 as thats the WAN.

Hosts in the Office1 subnet have FULL internet access, DNS, can ping google's DNS, everything is dandy. For whatever reason the router cant though... :/





0
Comment
Question by:VCSLI
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 3
4 Comments
 
LVL 35

Expert Comment

by:Ernie Beek
ID: 36580085
So is there a reason you hve two public IPs on the ext1 ?
0
 

Author Comment

by:VCSLI
ID: 36580609
Yes i run several different servers / services which require multiple public IP's.

THat should not make any difference here.
0
 

Accepted Solution

by:
VCSLI earned 0 total points
ID: 37543204
Turns out i just needed to reboot that workstation... I was working remotely so couldn't do it. It los internet so therefore i couldn't remote into it.
0
 

Author Closing Comment

by:VCSLI
ID: 37588845
Problem fixed...
0

Featured Post

Online Training Solution

Drastically shorten your training time with WalkMe's advanced online training solution that Guides your trainees to action. Forget about retraining and skyrocket knowledge retention rates.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

When you try to share a printer , you may receive one of the following error messages. Error message when you use the Add Printer Wizard to share a printer: Windows could not share your printer. Operation could not be completed (Error 0x000006…
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
NetCrunch network monitor is a highly extensive platform for network monitoring and alert generation. In this video you'll see a live demo of NetCrunch with most notable features explained in a walk-through manner. You'll also get to know the philos…
In this brief tutorial Pawel from AdRem Software explains how you can quickly find out which services are running on your network, or what are the IP addresses of servers responsible for each service. Software used is freeware NetCrunch Tools (https…

691 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question