I have 2 - 2008 R2 Virtual servers (VMware) setup for load balancing. Both dual nics..One nic for network and the other for the NLB cluster:
--------- App1 (.188 address) and App2 (.190 address).
When you RDP to 188 (App1), it actually connects to 190 (App2).
If you RDP to 188 (App1) when 188 (App1) is off, it will not connect to anything
If you RDP to 188 (App1) when 190 (App2) is off it will correctly connect to 188 (App1)
Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.
Normally after a failure of Domain Controller, when promoting new DC the DC is renamed, we will discuss the options in Dcpromo to re-create the DC with the same name.
You are a small IT shop with two Domain Controllers (Domain Contr…
I had a question today where the user wanted to know how to delete an SSL Certificate, so I thought that I would quickly add this How to! Article for your reference.
WHY WOULD YOU WANT TO DELETE A CERTIFICATE?
1. If an incorrect certificate was …
This tutorial will give a an overview on how to deploy remote agents in Backup Exec 2012 to new servers.
Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as connecting to a remote Back…
This tutorial will show how to configure a single USB drive with a separate folder for each day of the week. This will allow each of the backups to be kept separate preventing the previous day’s backup from being overwritten.
The USB drive must be s…