Solved

Arcserve D2D r15 / 16 disk discovery issue

Posted on 2011-09-22
1
605 Views
Last Modified: 2012-05-12
Hi people,

Having a problem with Arcserve D2D r15 / r16 not finding the 'current destination disk/volume layout' when trying to restore my test dell poweredge for a networked NAS. Setup with 3 x 37gb disk as RAID5

If I boot using the D2D disks on say, my optiplex 780, I can see the local disk partion of the pc and can restore. However, I need be able to run a restore to that server if failure occurs on a particular live unit.

Thanks
0
Comment
Question by:jovonn
1 Comment
 
LVL 1

Accepted Solution

by:
jovonn earned 0 total points
ID: 36931302
Problem has now been resolved. It was due to the RAID driver in undetected driver area not being avalible. Downloaded the LSI SCSI Raid PERC2 driver from dell and installed the 'oem' driver version and disks were detected.

Please close this.
0

Featured Post

Edgartown IT Case Study

Learn about Edgartown's quest to ensure the safety and security of the entire town's employee and citizen data. Read the case study!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
HP 2530 switch and routing 4 56
Port status messages not appearing in console 11 29
Copying out Cisco backups from SolarWinds 13 54
GPS For Commercial Vehicles 10 20
If you're not part of the solution, you're part of the problem.   Tips on how to secure IoT devices, even the dumbest ones, so they can't be used as part of a DDoS botnet.  Use PRTG Network Monitor as one of the building blocks, to detect unusual…
In this article we will learn how to backup a VMware farm using Nakivo Backup & Replication. In this tutorial we will install the software on a Windows 2012 R2 Server.
This tutorial will walk an individual through the steps necessary to install and configure the Windows Server Backup Utility. Directly connect an external storage device such as a USB drive, or CD\DVD burner: If the device is a USB drive, ensure i…
Two types of users will appreciate AOMEI Backupper Pro: 1 - Those with PCIe drives (and haven't found cloning software that works on them). 2 - Those who want a fast clone of their boot drive (no re-boots needed) and it can clone your drive wh…

713 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question