Solved

Cisco 2950 switch

Posted on 2011-09-22
2
391 Views
Last Modified: 2012-05-12
I was asked to download the config of a Cisco 2950 switch, I have never done this before is there a simple procedure to do this??  And, if so can the config be downloaded while switch is in use??
0
Comment
Question by:qec-cmolloy
  • 2
2 Comments
 
LVL 22

Accepted Solution

by:
eeRoot earned 500 total points
ID: 36584796
If you have a TFTP server set up, you can access the switch via telnet or SSH and use the copy command to copy the config.

Or you can access the switch via telnet, SSH, or the direct connect management port with putty, enable logging, and type sh run.  This will create a text file with the config

Here's a good video tutorial - http://www.youtube.com/watch?v=-p6tuHxqAXo
0
 
LVL 22

Expert Comment

by:eeRoot
ID: 36584801
0

Featured Post

Three Reasons Why Backup is Strategic

Backup is strategic to your business because your data is strategic to your business. Without backup, your business will fail. This white paper explains why it is vital for you to design and immediately execute a backup strategy to protect 100 percent of your data.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
fibre channel switch - sfp needed? 2 56
Need help with VLAN issue 6 76
eigrp - not allow a subnet from advertising 1 75
hp laptop model 10 83
How to fix error ""Failed to validate the vCentre certificate. Either install or verify the certificate by using the vSphere Data Protection Configuration utility" when you are trying to connect to VDP instance from Vcenter.
A quick step-by-step overview of installing and configuring Carbonite Server Backup.
This tutorial will show how to configure a single USB drive with a separate folder for each day of the week. This will allow each of the backups to be kept separate preventing the previous day’s backup from being overwritten. The USB drive must be s…
This tutorial will walk an individual through setting the global and backup job media overwrite and protection periods in Backup Exec 2012. Log onto the Backup Exec Central Administration Server. Examine the services. If all or most of them are stop…

749 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question