Go Premium for a chance to win a PS4. Enter to Win

x
?
Solved

commands on Cisco 4500 switch to enable radius...

Posted on 2011-09-22
3
Medium Priority
?
989 Views
Last Modified: 2012-05-12
I've just setup an NPS server (server 2008) and I've added my Cisco 4507 switch as a client. However, I'm not sure what commands are needed to enable radius on the switch and point it to the NPS server and the secret.

Can anyone help me out with the commands I would need to get this going? I have it working on my wireless LAN controller but not the 4500 switch.
0
Comment
Question by:willlandymore
  • 2
3 Comments
 
LVL 18

Accepted Solution

by:
jmeggers earned 2000 total points
ID: 36587379
Try:

configure terminal
radius-server host 172.10.0.1 auth-port 1612 key <string>
aaa new-model
aaa group server radius group1
server host 172.10.0.1
exit

The syntax may be different depending on what code version you're running.  Some parameters may be optional if you're not doing anything non-standard (such as port number).
0
 
LVL 1

Author Comment

by:willlandymore
ID: 36587391
awesome. Thanks.
0
 
LVL 1

Author Comment

by:willlandymore
ID: 36587457
oops...couple of those won't work.

In the switches there are no 'radius' commands, but if you type:

conf t
aaa new-model
aaa group server radius group1
aaa <host IP>
exit

that works. I just can't find where to put the shared secret
0

Featured Post

Nothing ever in the clear!

This technical paper will help you implement VMware’s VM encryption as well as implement Veeam encryption which together will achieve the nothing ever in the clear goal. If a bad guy steals VMs, backups or traffic they get nothing.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

This article is a collection of issues that people face from time to time and possible solutions to those issues. I hope you enjoy reading it.
WARNING:   If you follow the instructions here, you will wipe out your VTP and VLAN configurations.  Make sure you have backed up your switch!!! I recently had some issues with a few low-end Cisco routers (RV325) and I opened a case with Cisco TA…
Get a first impression of how PRTG looks and learn how it works.   This video is a short introduction to PRTG, as an initial overview or as a quick start for new PRTG users.
In this tutorial you'll learn about bandwidth monitoring with flows and packet sniffing with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're interested in additional methods for monitoring bandwidt…

885 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question