Solved

router serial connections

Posted on 2011-09-22
1
487 Views
Last Modified: 2012-05-12
I'm presently using GNS for Labs for Cisco Routers/Switches and the issue I'm having is that I'm using Cisco's Lab Portfolio 642-901 to do the labs.  Issue really comes into play when the lab's ask for s0/0/0 and the routers within GNS, that I use, are 2691 and 7200 series routers and I don't believe that they have s0/0/0, but they do have s0/0, s1/0, s1/1 and so on.  Which routers should I be using in order to match the serial numbers that the labs ask for?

0
Comment
Question by:ee4itpro
1 Comment
 
LVL 35

Accepted Solution

by:
Ernie Beek earned 500 total points
Comment Utility
That really shoudn't be a prtoblem. The naming conventions (for modular routers/switches) are like:
interface-name shelf/module/interface-number or for smaller models: interface-name module/interface-number.

So you can simple replace s0/0/0 with s0/0, s0/0/1 with s0/1, etc. This won't change anything to the result of the labs.
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Hello , This is a short article on how would you go about enabling traceoptions on a Juniper router . Traceoptions are similar to Cisco debug commands but these traceoptions are implemented in Juniper networks router . The following demonstr…
Network ports are the threads that hold network communication together. They are an essential part of networking that can be easily ignore or misunderstood, my goals is to show those who don't have a strong network foundation how network ports opera…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

13 Experts available now in Live!

Get 1:1 Help Now