Solved

What type of router do I need for 40 vpn connections?

Posted on 2011-09-26
4
256 Views
Last Modified: 2012-05-12
I currently have a BT business broadband connection into my office. Using this internet connection I have to have a lot of VPN connections going out. At the moment I can connect 20 VPN connections, however I need 40. As soon as I try to connect any more than 20 they begin to drop out.

So am I guessing that there is a limit somewhere, I had been informed that it may be a limit on the NAT in the router. The router I am using is the BT Business Hub. If it is the router that is not allowing any more than 20 VPN connections can somebody please suggest a router that would allow me to have 40.

Cheers
0
Comment
Question by:Ben_Locke
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
  • 2
4 Comments
 
LVL 11

Accepted Solution

by:
DIPRAJ earned 500 total points
ID: 36598499
The Cisco IPsec and SSL VPN AIM supports up to 800 tunnels on the Cisco 1841, up to 1500 tunnels on the Cisco 2800 Series, and up to 2000 tunnels on the Cisco 3800 Series.

check the url
http://www.cisco.com/en/US/prod/collateral/routers/ps5853/data_sheet_vpn_aim_for_18128003800routers_ps5853_Products_Data_Sheet.html
0
 

Author Comment

by:Ben_Locke
ID: 36598782
So if I was to get one of these routers, I can plug my internet directly into it? So I will no longer need the BT Business Hub?
0
 
LVL 11

Assisted Solution

by:DIPRAJ
DIPRAJ earned 500 total points
ID: 36714698
just take the internet connectivity..with public ip(static)...and you can create ipsec/ssl based vpn
0
 

Author Comment

by:Ben_Locke
ID: 37006763
Problem solved, was a problem with the ISP, even though they sent me round the houses with the router situation.

Will spread points, thanks for the  advice
0

Featured Post

Independent Software Vendors: We Want Your Opinion

We value your feedback.

Take our survey and automatically be enter to win anyone of the following:
Yeti Cooler, Amazon eGift Card, and Movie eGift Card!

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
Let’s list some of the technologies that enable smooth teleworking. 
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

734 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question