Solved

Windows 2003 Dual NIC Dual DHCP

Posted on 2011-09-26
3
175 Views
Last Modified: 2012-11-29
HI,

I have got a Domain Controller that is running our DHCP server for 192.168.10, we now want to setup another range 192.168.11 for our wirless devices, have created a VLAN for it. We have a 2nd Nic in the machine. What would be the next stage?
0
Comment
Question by:DennisHoward
  • 2
3 Comments
 
LVL 17

Expert Comment

by:OriNetworks
ID: 36599235
While I generally would not have a dual homed domain controller, if you want to serve addresses only on one NIC, you can go into dhcp management and go to the properties of the dhcp server, click advanced, and manage the bindings. Otherwise, the same NIC can serve different address ranges if it is routed properly.
0
 
LVL 1

Author Comment

by:DennisHoward
ID: 36599329
Could i serve one set of ip-addresses on one NIC, and another set on another NIC? that is ideally what we would like to do.
0
 
LVL 17

Accepted Solution

by:
OriNetworks earned 500 total points
ID: 37298055
0

Featured Post

Back Up Your Microsoft Windows Server®

Back up all your Microsoft Windows Server – on-premises, in remote locations, in private and hybrid clouds. Your entire Windows Server will be backed up in one easy step with patented, block-level disk imaging. We achieve RTOs (recovery time objectives) as low as 15 seconds.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Recently, I had the need to build a standalone system to run a point-of-sale system. I’m running this on a low-voltage Atom processor, so I wanted a light-weight operating system, but still needed Windows. I chose to use Microsoft Windows Server 200…
I've always wanted to allow a user to have a printer no matter where they login. The steps below will show you how to achieve just that. In this Article I'll show how to deploy printers automatically with group policy and then using security fil…
I've attached the XLSM Excel spreadsheet I used in the video and also text files containing the macros used.

790 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question