Solved

Is my SSD up to par?

Posted on 2011-09-26
2
449 Views
Last Modified: 2012-05-12
I just got an 120GB SSD. It is an OCZ Vortex.

I used CrystalDisk to bench the drive.  I have noticed that respons seems fast...but over all speed is not what I was expecting.   When I used my SATA II Raptor drives x4 in Raid 0, I get a much faster speed when extracting large files etc.

I would like sombody to look at the results and tell me if this is PAR for this drive. If so I will keep it. If not I may need an RMA.  Im 100% to SSD so I am not sure.  I did set BIOS to AHCI for SSD.

ALL    4     500MB              C: 56%  (63/112)

                  Read [MB/s]               Write [MB/s]
Seq             333.3                         240.2
512k           353.6                         236.5
4k                31.51                         58.38
4k qd32      238.9                         195.8


Do those speeds seem normal?
0
Comment
Question by:pcchaos
2 Comments
 
LVL 37

Accepted Solution

by:
Neil Russell earned 500 total points
ID: 36600965
0
 

Author Closing Comment

by:pcchaos
ID: 36601171
Thanks.

Ill keep it.
0

Featured Post

Top 6 Sources for Identifying Threat Actor TTPs

Understanding your enemy is essential. These six sources will help you identify the most popular threat actor tactics, techniques, and procedures (TTPs).

Join & Write a Comment

#Citrix #Citrix Netscaler #HTTP Compression #Load Balance
This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
This tutorial will walk an individual through the steps necessary to configure their installation of BackupExec 2012 to use network shared disk space. Verify that the path to the shared storage is valid and that data can be written to that location:…
This video gives you a great overview about bandwidth monitoring with SNMP and WMI with our network monitoring solution PRTG Network Monitor (https://www.paessler.com/prtg). If you're looking for how to monitor bandwidth using netflow or packet s…

762 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

23 Experts available now in Live!

Get 1:1 Help Now