Solved

Sample Config for Cisco 1700 Series Router

Posted on 2011-09-26
3
484 Views
Last Modified: 2012-05-12
Hello everyone... my manager has tasked me with setting up a cisco 1720 router for our 2 1.5 Mb T1 lines (they are from the same provider). As of right now they are running through an adtran netvanta 3200 for a usable bandwidth of 3 Mb. Unfortunately the equipment is rented and we cannot change anything if we needed to. So i was given the task of setting up another router for the lines. The thing is i have setup switches and firewalls but I do not have much experience with the cisco routers. Can anyone point me to some good tutorials, sample configs, or information on how to properly setup the router. The 1720 has 2 T1 wic cards...

Thanks in advance

Jonathan
0
Comment
Question by:JBober14
  • 2
3 Comments
 
LVL 18

Accepted Solution

by:
fgasimzade earned 500 total points
ID: 36707633
0
 

Author Comment

by:JBober14
ID: 36709809
I will give it a try this afternoon. Thanks for the link.
0
 

Author Comment

by:JBober14
ID: 36711608
Below is what I've done so far... please provide some feedback as to whether or not this looks correct... thank you:

version 12.1
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
enable secret 5 xxxxxxxxxx
!
memory-size iomem 25
ip subnet-zero
ip name-server 65.www.x.zzz
ip name-server 65.www.y.zzz
!
interface Multilink1
 description multilink PPP connection
 no ip address  <--- I'm waiting on ISP to get me the serial IP address
 no ip redirects
 no ip proxy-arp
 ip nat outside
 no ip route-cache
 no cdp enable
 ppp multilink
 multilink-group 1
!
interface Serial0
 description first multilink connection
 no ip address
 no ip redirects
 no ip proxy-arp
 encapsulation ppp
 no ip route-cache
 load-interval 30
 no keepalive
 shutdown
 no fair-queue
 no cdp enable
 ppp multilink
 multilink-group 1
!
interface Serial1
 description second multilink connection
 no ip address
 no ip redirects
 no ip proxy-arp
 encapsulation ppp
 no ip route-cache
 load-interval 30
 no keepalive
 shutdown
 no fair-queue
 no cdp enable
 ppp multilink
 multilink-group 1
!
interface FastEthernet0
 description public interface to bonded T1
 ip address 67.xxx.yyy.zzz 255.255.255.248  <---Gateway IP
 ip nat outside
 no ip route-cache
 shutdown
 speed auto
 full-duplex
 no cdp enable
!
ip classless
ip route 0.0.0.0 0.0.0.0 Multilink1
no ip http server
!
no cdp run
!
line con 0
line aux 0
line vty 0 4
!
no scheduler allocate
end
0

Featured Post

PRTG Network Monitor: Intuitive Network Monitoring

Network Monitoring is essential to ensure that computer systems and network devices are running. Use PRTG to monitor LANs, servers, websites, applications and devices, bandwidth, virtual environments, remote systems, IoT, and many more. PRTG is easy to set up & use.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

There are two basic ways to configure a static route for Cisco IOS devices. I've written this article to highlight a case study comparing the configuration of a static route using the next-hop IP and the configuration of a static route using an outg…
Hello to you all, I hear of many people congratulate AWS (Amazon Web Services) on how easy it is to spin up and create new EC2 (Elastic Compute Cloud) instances, but then fail and struggle to connect to them using simple tools such as SSH (Secure…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

772 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question