Installation of esxi issue

Hi all

I have sun blade model x6270 and EMC storage SAN storage.
I assign to this blade 20gb through EMC storage to order to boot from LUN.
I went to the ILOM and open rdp to start the process so I added esxi iso image to the console and boot from the virtual disk then I install this image on the 20gb LUN, so far everything looks fine, but in a middle of the installation its stop to install and pop me this message
please see attachment

Thansk,
esxi.bmp
LVL 1
Moti Mashiah.NET DeveloperAsked:
Who is Participating?
 
Moti MashiahConnect With a Mentor .NET DeveloperAuthor Commented:
thank you sooo much for help

we just fixed the problem. it was blade issue SUN replaced our blade and everything working well right now

thanks again
0
 
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
Have you considered installing ESXi to a USBflash drive or SD flash card?

Back to your issue?

Media Fault, LUN Fault?

Have you tried the installation more than once?

Have you tried another LUN?

What hba are you using?
0
 
Moti Mashiah.NET DeveloperAuthor Commented:
yes I tried another LUN and the hba is QLOGIC 3472

0
Get your problem seen by more experts

Be seen. Boost your question’s priority for more expert views and faster solutions

 
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
Can you confirm with the qlogic hba, if you start the hba BIOS, there is a format and verify option, for the LUN, can you format and verify the LUN correctly?
0
 
Andrew Hancock (VMware vExpert / EE MVE^2)VMware and Virtualization ConsultantCommented:
Glad you got it fixed, no problems.
0
 
Moti Mashiah.NET DeveloperAuthor Commented:
i have been solved the problem already
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.