seethe
asked on
port forwarding on sonicwall tz200
Thanks in advance for your help with this.
I am trying to give support department access to a computer on my internal network 192.x.x.x. I would like to set my public (wan) ip to listen on, say, port 7654 and when traffic is received on that port, it would be forwarded to the internal ip.
thanks again!
I am trying to give support department access to a computer on my internal network 192.x.x.x. I would like to set my public (wan) ip to listen on, say, port 7654 and when traffic is received on that port, it would be forwarded to the internal ip.
thanks again!
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.
Easy method is to create the Address Objects for each port and protocol needed (7654/TCP and 7654/UDP for example) and add them to an Address Group.
Then run the Public Server Wizard which is available in the upper-right of the interface.
I would not suggest doing it manually, the Public Server Wizard is the way to go.
Then run the Public Server Wizard which is available in the upper-right of the interface.
I would not suggest doing it manually, the Public Server Wizard is the way to go.
ASKER
Great link to helpful resource covering a range of topics related to correctly configuring my sonicwall tz200 series device.
Step 2: Defining the appropriate NAT Policies (Inbound, Outbound and Loopback)
Step 3: Creating the necessary WAN > Zone Access Rules for public access
Here's a link for more info: http://www.fuzeqna.com/son