Solved

Server to Server VPN

Posted on 2011-09-28
5
244 Views
Last Modified: 2012-05-12
I am considering expanding my small domainn to a dedicated server rental service. I am renting two dedicated to test setting up a domain. The problem with these rented servers is that they randomly setup the servers in a different subnets and I need to setup a way to connect them together so that they can become one domain. I would asume that I need to do this using a VPN. I believe the servers are in the same building and it should work ok if I can get them to connect.

What are the steps to get this done?
0
Comment
Question by:bbaldwin
  • 3
  • 2
5 Comments
 
LVL 10

Expert Comment

by:SuperTaco
ID: 36751806
if they are on different subnets that don't talk to each other you will have to create a site to site VPN.  You can do this through windows, but I prefer to do it through the firewalls or routers  
0
 
LVL 2

Author Comment

by:bbaldwin
ID: 36795308
I don't have control of the servers in any way regarding routers. Do you have any info on creating a persistent VPN connection?
0
 
LVL 10

Accepted Solution

by:
SuperTaco earned 500 total points
ID: 36796429
http://technet.microsoft.com/en-us/library/cc737621(WS.10).aspx

I would use the IPSEC VPN for convenience sake.

this might be a bit easier to follow

http://blog.netnerds.net/2006/04/site-to-site-vpn-using-windows-2003/
0
 
LVL 2

Author Comment

by:bbaldwin
ID: 37429846
I was never able to solve this.
0
 
LVL 2

Author Closing Comment

by:bbaldwin
ID: 37429851
I was unable to create VPNs on these servers.
0

Featured Post

IT, Stop Being Called Into Every Meeting

Highfive is so simple that setting up every meeting room takes just minutes and every employee will be able to start or join a call from any room with ease. Never be called into a meeting just to get it started again. This is how video conferencing should work!

Join & Write a Comment

Secure VPN Connection terminated locally by the Client.  Reason 442: Failed to enable Virtual Adapter. If you receive this error on Windows 8 or Windows 8.1 while trying to connect with the Cisco VPN Client then the solution is a simple registry f…
This is an article about my experiences with remote access to my clients (so that I may serve them) and eventually to my home office system via Radmin Remote Control. I have been using remote access for over 10 years and have been improving my metho…
This tutorial will give a an overview on how to deploy remote agents in Backup Exec 2012 to new servers. Click on the Backup Exec button in the upper left corner. From here, are global settings for the application such as connecting to a remote Back…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

747 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

8 Experts available now in Live!

Get 1:1 Help Now