Solved

Cisco 1841w/ CSU/DSU wic All-in-one

Posted on 2011-09-28
2
555 Views
Last Modified: 2012-05-12
I am new to CISCO routers so please bear with me, I have a CISCO 1841 with a T1 CSU/DSU in Slot 0 (s0/0/0). I need to have it configure with the info the ISP provided me below and I need to assign a Full class c ip address: 192.168.41.0. how do I do the above and NAT with the info below:

IP Address Block
IP Address: 12.158.252.152/29
IPv6 Address: /0

WAN Link Details:
WAN Link IP Address:12.91.225.236
AR Serial INT IP Address:12.91.225.237
CR Serial INT IP Address:12.91.225.238
WAN Link Subnet Mask:255.255.255.252

0
Comment
Question by:jshilge
2 Comments
 
LVL 1

Accepted Solution

by:
i_am_pete earned 500 total points
ID: 36720670
What is the encapsulation in the serial interface?
Is this an internet t1?

config t
int s0/0/0
ip address 12.91.225.236 255.255.255.252
ip nat outside

int fe0/0
ip address 192.168.41.0 255.255.255.0
ip nat inside

access-list 100 permit 192.168.41.0 0.0.0.255

ip nat inside source list 100 interface s0/0/0 overload
0
 

Author Comment

by:jshilge
ID: 36905026
work great thanks.
0

Featured Post

Is Your Active Directory as Secure as You Think?

More than 75% of all records are compromised because of the loss or theft of a privileged credential. Experts have been exploring Active Directory infrastructure to identify key threats and establish best practices for keeping data safe. Attend this month’s webinar to learn more.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

The Cisco RV042 router is a popular small network interfacing device that is often used as an internet gateway. Network administrators need to get at the management interface to make settings, change passwords, etc. This access is generally done usi…
Creating an OSPF network that automatically (dynamically) reroutes network traffic over other connections to prevent network downtime.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

895 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question

Need Help in Real-Time?

Connect with top rated Experts

15 Experts available now in Live!

Get 1:1 Help Now