Go Premium for a chance to win a PS4. Enter to Win

x
?
Solved

Watchguard XTM Branch Office VPN

Posted on 2011-09-29
2
Medium Priority
?
1,148 Views
Last Modified: 2012-05-12
I am looking to install a BOVPN at a second location. with a watch guard xtm23. does that location need to have a static ip or can you somehow use dynamic DNS to allow this to work?

thanks
0
Comment
Question by:mxrider_420
2 Comments
 
LVL 32

Accepted Solution

by:
dpk_wal earned 2000 total points
ID: 36893855
You can have static IP or domain name at the second location [using dynamic DNS]; look at link below:
http://customers.watchguard.com/articles/Article/2701?retURL=%2Fapex%2FknowledgeHome&popup=false

Thank you.
0
 
LVL 1

Author Closing Comment

by:mxrider_420
ID: 36894524
Thanks for the link i will check this out. I am not sure how mu rules will work though if the ip changes, i assume ill use a host name for those too and will also have to for my static routes as well.
0

Featured Post

New Tabletop Appliances Blow Competitors Away!

WatchGuard’s new T15, T35 and T55 tabletop UTMs provide the highest-performing security inspection in their class, allowing users at small offices, home offices and distributed enterprises to experience blazing-fast Internet speeds without sacrificing enterprise-grade security.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

In the hope of saving someone else's sanity... About a year ago we bought a Cisco 1921 router with two ADSL/VDSL EHWIC cards to load balance local network traffic over the two broadband lines we have, but we couldn't get the routing to work consi…
A 2007 NCSA Cyber Security survey revealed that a mere 4% of the population has a full understanding of firewalls. As business owner, you should be part of that 4% that has a full understanding.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…

971 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question