Cisco 300 series auto configuration

Hi team!

Somebody can let me know how can I make DHCP "auto-configuration" for Cisco Swtiches 300 series? I need to send switch configuration forom a central server.

Regards.
 
ipworkersAsked:
Who is Participating?
 
Spar-QCommented:
Try this out: http://www.cisco.com/en/US/docs/ios/12_0/configfun/configuration/guide/fccfgfil.html#wp4475

Look for the header titled "Specify the Startup Configuration File"
0
 
Spar-QCommented:
What do you mean, exactly? Are you trying to get the switch to use a DHCP address on vlan1? Or are you trying to get it to download its config from a central server by way of tftp?
0
 
ipworkersAuthor Commented:
I'm trying to get it to download de config from a central sever.
0
 
Spar-QCommented:
From EXEC mode:

configure terminal
boot network tftp://<ip>/directory/filename
service config
end
copy system:running-config nvram:startup-config
0
 
Spar-QCommented:
For Step 2, if you do not specify a network configuration filename, the Cisco IOS software uses the default filename network-confg. If you omit the address, the router uses the broadcast address.
0
Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.

All Courses

From novice to tech pro — start learning today.