Solved

can't apply route-map to my bgp config

Posted on 2011-09-30
3
432 Views
Last Modified: 2012-05-12
I am working on a cisco router running IOS v 15.01
I created a route-map in order to apply some AS-prepending to a neighbor but the command is no longer available?  below are my only options:

R1 (config-router)#neighbor 1.1.1.2 ?
  description              Neighbor specific description
  disable-connected-check  one-hop away EBGP peer using loopback address
  ebgp-multihop            Allow EBGP neighbors not on directly connected
                           networks
  fall-over                session fall on peer route lost
  ha-mode                  high availability mode
  inherit                  Inherit a template
  local-as                 Specify a local-as number
  password                 Set a password
  peer-group               Member of the peer-group
  remote-as                Specify a BGP neighbor
  shutdown                 Administratively shut down this neighbor
  timers                   BGP per neighbor timers
  transport                Transport options
  ttl-security             BGP ttl security check
  update-source            Source of routing updates
  version                  Set the BGP version to match a neighbor

0
Comment
Question by:FREDARCE
[X]
Welcome to Experts Exchange

Add your voice to the tech community where 5M+ people just like you are talking about what matters.

  • Help others & share knowledge
  • Earn cash & points
  • Learn & ask questions
  • 2
3 Comments
 
LVL 28

Expert Comment

by:Jan Springer
ID: 36892852
What image do you have loaded?
0
 

Author Comment

by:FREDARCE
ID: 36892863
Cisco IOS Software, C3900 Software (C3900-UNIVERSALK9-M), Version 15.0(1)M5, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Wed 23-Feb-11 18:29 by prod_rel_team

ROM: System Bootstrap, Version 15.0(1r)M8, RELEASE SOFTWARE (fc1)

ny4core-ext-r1 uptime is 2 weeks, 6 days, 19 hours, 30 minutes
System returned to ROM by power-on
System image file is "flash0:c3900-universalk9-mz.SPA.150-1.M5.bin"
Last reload type: Normal Reload


This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.

A summary of U.S. laws governing Cisco cryptographic products may be found at:
http://www.cisco.com/wwl/export/crypto/tool/stqrg.html

If you require further assistance please contact us by sending email to
export@cisco.com.

Cisco CISCO3925-CHASSIS (revision 1.1) with C3900-SPE100/K9 with 999424K/49152K bytes of memory.
Processor board ID FTX1524AHA1
3 Gigabit Ethernet interfaces
DRAM configuration is 72 bits wide with parity enabled.
255K bytes of non-volatile configuration memory.
255744K bytes of ATA System CompactFlash 0 (Read/Write)


License Info:

License UDI:

-------------------------------------------------
Device#   PID                   SN
-------------------------------------------------
*0        C3900-SPE100/K9       FOC15183KHF



Technology Package License Information for Module:'c3900'

----------------------------------------------------------------
Technology    Technology-package          Technology-package
              Current       Type          Next reboot
-----------------------------------------------------------------
ipbase        ipbasek9      Permanent     ipbasek9
security      None          None          None
uc            None          None          None
data          None          None          None

Configuration register is 0x2102
0
 
LVL 28

Accepted Solution

by:
Jan Springer earned 500 total points
ID: 36892948
You need to upgrade your license.  You are missing a ton of BGP features -- not just route maps.
0

Featured Post

Threat Trends for MSPs to Watch

See the findings.
Despite its humble beginnings, phishing has come a long way since those first crudely constructed emails. Today, phishing sites can appear and disappear in the length of a coffee break, and it takes more than a little know-how to keep your clients secure.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

Suggested Solutions

Title # Comments Views Activity
not output on the show arp command 5 84
gns3 - switchport trunk allow vlan error 4 102
IP range 6 94
How to disable sflow Cisco nexus 9k 3 50
Security is one of the biggest concerns when moving and migrating your data from your on-premise location to the Public Cloud.  Where is your data? Who can access it? Will it be safe from accidental deletion?  All of these questions and more are imp…
In the world of WAN, QoS is a pretty important topic for most, if not all, networks. Some WAN technologies have QoS mechanisms built in, but others, such as some L2 WAN's, don't have QoS control in the provider cloud.
After creating this article (http://www.experts-exchange.com/articles/23699/Setup-Mikrotik-routers-with-OSPF.html), I decided to make a video (no audio) to show you how to configure the routers and run some trace routes and pings between the 7 sites…
Here's a very brief overview of the methods PRTG Network Monitor (https://www.paessler.com/prtg) offers for monitoring bandwidth, to help you decide which methods you´d like to investigate in more detail.  The methods are covered in more detail in o…

739 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question