[Okta Webinar] Learn how to a build a cloud-first strategyRegister Now

x
?
Solved

HP Procurve 5400 default route change

Posted on 2011-10-03
2
Medium Priority
?
756 Views
Last Modified: 2013-11-05
I am upgrading my firewall in the next few days, with this upgrade I will need to change some routes on my Procurve.  I unfortunately do not know much about the switch, it was put in by a consultant and has been working great.  

I can do basic stuff, but this just makes me nervous, I need to make sure I know how to do the following any help is appreciated.

- Backup the config (Obvious reason)
- Currently the default route of the switch for I think all vlans is 192.168.45.15, I need to change this to 192.168.45.48.

I also will eventually need to change all the routes from 192.168.45.13 to our new 192.168.45.48 there are a few and one in the ACL which needs to be changed.  I just don't want to mess anything up.  This is all just internal IP's so I don't have a problem posting the config it is very small. hpconfig.txt
0
Comment
Question by:mwebb_sdmc
2 Comments
 
LVL 12

Accepted Solution

by:
atrevido earned 2000 total points
ID: 36906778
ip route 0.0.0.0 0.0.0.0 192.168.45.48
ip route 10.1.1.0 255.255.255.0 192.168.45.48
ip route 192.168.46.0 255.255.255.0 192.168.45.48
Now remove old routes
no ip route 0.0.0.0 0.0.0.0 192.168.45.15
no ip route 10.1.1.0 255.255.255.0 192.168.45.13
no ip route 192.168.46.0 255.255.255.0 192.168.45.13

Now edit that ACL -- obviously from config mode

ip access-list extended "Guest
no 25
25 permit ip 0.0.0.0 255.255.255.255 192.168.45.48 0.0.0.0
exit
0
 

Author Closing Comment

by:mwebb_sdmc
ID: 36909466
Thank you.. I found most of it with "the google" ;-) but the ACL I wasn't sure how to edit.  thanks again for your help.  I did learn the hard way write mem though..
0

Featured Post

Prep for the ITIL® Foundation Certification Exam

December’s Course of the Month is now available! Enroll to learn ITIL® Foundation best practices for delivering IT services effectively and efficiently.

Question has a verified solution.

If you are experiencing a similar issue, please ask a related question

I eventually solved a perplexing problem setting up telnet for a new switch.  I installed a new Cisco WS-03560X-24P switch connected to an existing Cisco 4506 running a WS-X4013-10GE Sup II-Plus. After configuring vlans and trunking,  I could no…
In this article, the configuration steps in Zabbix to monitor devices via SNMP will be discussed with some real examples on Cisco Router/Switch, Catalyst Switch, NAS Synology device.
Please read the paragraph below before following the instructions in the video — there are important caveats in the paragraph that I did not mention in the video. If your PaperPort 12 or PaperPort 14 is failing to start, or crashing, or hanging, …
This lesson discusses how to use a Mainform + Subforms in Microsoft Access to find and enter data for payments on orders. The sample data comes from a custom shop that builds and sells movable storage structures that are delivered to your property. …
Suggested Courses

872 members asked questions and received personalized solutions in the past 7 days.

Join the community of 500,000 technology professionals and ask your questions.

Join & Ask a Question