Remote Desktop to 2003 Server

We have 3 windows 2003 server, two are running terminal servers and can be accessed via remote desktop outside our network using NAT
it's setup on the router to hit the router using 3389 and diff port numbers ex.4500
these two were setup before I arrived.

this last server, ive entered the same setup on the router
using port 4505 to NAT, called Cisco and verified the settings are right and I still cant access the server, what have I missed? ive added the "allow remote connections"

Now this last one is just in administration mode not terminal

ideas?
ravenrx7Asked:
Who is Participating?
I wear a lot of hats...

"The solutions and answers provided on Experts Exchange have been extremely helpful to me over the last few years. I wear a lot of hats - Developer, Database Administrator, Help Desk, etc., so I know a lot of things but not a lot about one thing. Experts Exchange gives me answers from people who do know a lot about one thing, in a easy to use platform." -Todd S.

Matt VCommented:
Can you remote desktop to it from the local network?  If you can, then the problem is definately in the router ACLs.
0
ravenrx7Author Commented:
yes I can remote into it
0
ravenrx7Author Commented:
we ran a NAT translations report and I tried to access it using remote desktop on my phone ( which works great) and it showed it hits the router and NAT is applied
0
Cloud Class® Course: SQL Server Core 2016

This course will introduce you to SQL Server Core 2016, as well as teach you about SSMS, data tools, installation, server configuration, using Management Studio, and writing and executing queries.

Matt VCommented:
Does the server have the default gateway set correctly?
0
ravenrx7Author Commented:
this is my DC, yes everything on the network is configured correctly
0
Matt VCommented:
Well, if nat is working but there is no response, either the outbound replies are blocked or there is no default route on the server.
0
ravenrx7Author Commented:
How would I check if outbound or routes aren't there?  If outbound was blocked on my dc wouldn't have more issues? Just wondering thanks
0
Matt VCommented:
Can you ping google.com from your DC?  
Do a route print from command line and see if there is a defat route, or a route for 0.0.0.0 mask 0.0.0.0
0
ravenrx7Author Commented:
IPv4 Route Table
===========================================================================
Interface List
0x1 ........................... MS TCP Loopback interface
0x10003 ...00 19 b9 d6 87 e5 ...... Broadcom BCM5708C NetXtreme II GigE (NDIS V
D Client)
===========================================================================
===========================================================================
Active Routes:
Network Destination        Netmask          Gateway       Interface  Metric
          0.0.0.0          0.0.0.0       10.102.1.1      10.102.4.18     10
       10.102.0.0      255.255.0.0      10.102.4.18      10.102.4.18     10
      10.102.4.18  255.255.255.255        127.0.0.1        127.0.0.1     10
   10.255.255.255  255.255.255.255      10.102.4.18      10.102.4.18     10
        127.0.0.0        255.0.0.0        127.0.0.1        127.0.0.1      1
        224.0.0.0        240.0.0.0      10.102.4.18      10.102.4.18     10
  255.255.255.255  255.255.255.255      10.102.4.18      10.102.4.18      1
Default Gateway:        10.102.1.1
===========================================================================
Persistent Routes:
  None
0
ravenrx7Author Commented:
10.102.4.18 is the DC

10.102.1.1 is the gateway
0
ravenrx7Author Commented:
firewall on cisco router was blocking that port
0

Experts Exchange Solution brought to you by

Your issues matter to us.

Facing a tech roadblock? Get the help and guidance you need from experienced professionals who care. Ask your question anytime, anywhere, with no hassle.

Start your 7-day free trial
ravenrx7Author Commented:
firewall on cisco router was blocking that port
0
It's more than this solution.Get answers and train to solve all your tech problems - anytime, anywhere.Try it for free Edge Out The Competitionfor your dream job with proven skills and certifications.Get started today Stand Outas the employee with proven skills.Start learning today for free Move Your Career Forwardwith certification training in the latest technologies.Start your trial today
Windows Server 2003

From novice to tech pro — start learning today.

Question has a verified solution.

Are you are experiencing a similar issue? Get a personalized answer when you ask a related question.

Have a better answer? Share it in a comment.