backup-exec-fw.png

<div>
Thanks for your quick responce....
</div>


<div>
<div class="content wysiwyg-content">
i have Backup Exec 2010R3, installed on Win2003R2. it was working fine for many months but recently we added one firewall to protect our serevrs. now server starts job normally but when verifying faild... any help plz.......
</div>
</div>


i have Backup Exec 2010R3, installed on Win2003R2. it was working fine for many months but recently we added one firewall to protect our serevrs. now server starts job normally but when verifying faild... any help plz.......

Backup Exec Fail to authenticate

Hardware-based firewalls provide more sophisticated protection for inbound and outbound traffic than the simple Windows software firewall or the basic NAT firewalls found in routers. These devices implement techniques such as stateful packet inspection, deep packet inspection, and content filtering; and may include built-in antivirus and anti-malware protection.

Hardware Firewalls

The term "Backup" means the methods and processes involved to copy computer data (system data as well as application data) to media other than the ones where the data originally live (disk, tape, optical, cloud). "Restore" in turn means the methods and processes involved in data recovery, i. e., bringing back copied computer data to their original location. Backup/Restore primarily serves as a means of protection against data loss, be it due to disaster, corruption or sabotage. It can also be used for recovering data from an earlier point in time and even for cloning machines or applications. There is a wide variety of backup/restore software available, from expensive commercial products to free or open source tools.

Storage Software

Servers are computing devices that are similar to desktop computers in that they have the same basic components, but are significantly different in size, configuration and purpose. Servers are usually accessed over a network, and many run unattended, without a computer monitor, input device, audio hardware or USB interfaces. Many servers do not have a graphical user interface (GUI), and are configured and managed remotely. Servers typically include hardware redundancy such as dual power supplies, RAID disk systems, and ECC memory, along with extensive pre-boot memory testing and verification. Critical components might be hot swappable, and to guard against overheating, servers might have more powerful fans or use water cooling.