• Status: Solved
  • Priority: Medium
  • Security: Public
  • Views: 680
  • Last Modified:

luns with emulex

How can you see the lun id of the emc disk with an emulex hba?
0
lolaferrari
Asked:
lolaferrari
  • 2
  • 2
1 Solution
 
woolmilkporcCommented:
If you have EMC PowerPath installed run

powermt display dev=all

You will see one block of output for each LUN, including LUN ID, device ID, state, and path information.

This will work with any supported HBA, regardless of manufacturer/model.

Here is more about powermt:

http://www.thegeekstuff.com/2010/10/powermt-command-examples/

wmp
0
 
lolaferrariAuthor Commented:
I don't have powermt but only have multipath but it only show the wwn of the disk and device id. Would be useful to see the lun number. Don't have syminq installed either
0
 
woolmilkporcCommented:
Did you try

multipath -v3 -ll

?
0
 
lolaferrariAuthor Commented:
many thanks!
0

Featured Post

What does it mean to be "Always On"?

Is your cloud always on? With an Always On cloud you won't have to worry about downtime for maintenance or software application code updates, ensuring that your bottom line isn't affected.

  • 2
  • 2
Tackle projects and never again get stuck behind a technical roadblock.
Join Now