Mat_Humphreys
asked on
enable OWA in exchange 2011
Is there any way of checking if Exchange 2011 is enabled for OWA, I think that I have opened the ports on the router (26,80 & 443) and pointed to the exchange server all fine. Was just wondering if there were some simple quick checks that I could do?
Thanks in advance.
Mat
Thanks in advance.
Mat
R--R
http://www.ntweekly.com/?p=593
If you installed a certificate then ask ISP to create a FQDNwhich should match the certificate FQDN and point it to the external ip address of firewall and nat to exchange server.
Open port 443.
Open port 443.
Try browsing to https://YOURCASSERVERNAME/OWA this should open OWA internally.
You can also test all connectivity by going to https://www.testexchangeconnectivity.com/
You can also test all connectivity by going to https://www.testexchangeconnectivity.com/
ASKER
Thank you for your replies, the problem was that the router has two sections that the ports needed to be opened in. However I am now getting a problem "Server Error in '/' Application" on this brand new server, this happens on the server or from a remote client!
Trying to find info with regards to this when I type in "https://IP ADD/exchange" then choose continue. that's when the problem occurs.
Cheers
Mat
Could do with a you tube crash course on SBS2011 me thinks!
Trying to find info with regards to this when I type in "https://IP ADD/exchange" then choose continue. that's when the problem occurs.
Cheers
Mat
Could do with a you tube crash course on SBS2011 me thinks!
You should not go to "https://IP ADD/exchange" but instead "https://IP ADD/OWA
ASKER CERTIFIED SOLUTION
membership
This solution is only available to members.
To access this solution, you must be a member of Experts Exchange.